User's Manual 

Product Description

Prolong The Life Of Your Battery!

The smart battery protection system shields your device from getting over charged, over load, discharge, over heated, reverses polarity and also provides efficient short circuit protection. It can handle 520W Solar Panel on 12v battery system or 1040W Solar Panel on 24v battery system. Works equally great for home, industrial or commercial use. Designed for optimum and safe charging performance.

Technical Data

40A MPPT Charge Controller Nominal System Voltage: 12V, 24V

Rated Charge Current: 40A

Rated Load Current: 20A

Max PV Open Circuit Voltage: 150V / 138V

Max PV Input Power: 520W (12v battery) / 1040W (24v battery)

MT50 Remote Meter Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

Remote Temperature Sensor Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M

USB to RS485 Converter Adapter This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware.

SolarEpic Tracer4215BN 40amp Solar Charge Controller Feature:

 

1. Negative Grounding, 150V /138V PV Input
2. Metal Case allows for natural heat dissipation
3. Support 4 charging options: Sealed, Gel, Flooded and User
4. 4 Stage Charging
5. Serial connection (string) of PV modules allows minimize the charging current as a way of saving the energy
6. Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
7. Ultra-fast tracking speed and tracking efficiency
8. Features Standard Modbus Interface with RS485 Port

 

MPPT Solar Charge Controller 40A Tracer4215BN Schematic Diagram

   VIDEO DEMO

 Latest product information（For more product video please click here） 

• 【High PV Input Power】This 60 amp MPPT Solar Panel Charger works with 840W Solar Panel on 12V Battery System and 1680W on 24V Battery.
• 【Compatible with a variety of batteries】Negative grounding design, four load control modes, supports lead-acid and lithium batteries.
• 【Powerful electronic protections】Eight electronic protections, including reverse polarity protection(for battery and array), solar short circuit protection, over-temperature protection, load short circuit protection, load over-current protection, heat sink temperature limit protection, over-volt / low-volt protection and battery shedding protection.
• 【OLED screen and MH-M80 Meter】The controller has a 1.3 inches OLED screen and a function button. MH-M80 Meter was attached, which can display system operating information and error indications. In addition to that, 3 status LEDs provide system status at a glance. The meter can easily set the parameters of the controller.
• 【4-stage battery charging】4-stage battery charging algorithm for rapid, efficient, and safe battery charging. The maximal wire size of the controller is 3AWG(25mm2).

Product Description

Technical Data

60A 150V MPPT Solar Charge Controller Nominal System Voltage: 12V, 24V

Rated Charge Current: 60A

Rated Load Current: 30A

Max. PV Open Circuit Voltage: 150V

Max. PV Input Power: 840W (12V battery) / 1680W (24V battery)

Max. Wire Size: 25mm2 / 3AWG

Data & Communications

Communication Port	Dual RJ45
Communication Protocols	Private protocol and MODBUS
PC Software	SolarMate
Meter	MH-M80 / MH-S80
Dry Contact	Via RJ45 port

 

1. Charging status / Load output status / Error LED
2. Function button
3. Digital OLED display
4. Temperature sensor terminals
5. Dual RJ45 serial communication ports
6. Input and output terminals (PV+/PV-/BAT+/BAT-/LOAD+/LOAD-)
7. Dedicated for grounding wire
8. Reverse fixing hole
9. Mounting holes for positively fixed fittings
10. Terminal cover plate

 

SolarEpic NS24H60 Solar Charge Controller 60A: Built with advanced power tracking technology to optimize the working of your solar charger system. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charges the battery. It supports lead-acid and lithium batteries.	MH-M80 Remote Meter: The digital Remote Meter displays system operating information, error indications. Information is displayed on an OLED display. Additionally, 3 status LEDs provide system status at a glance. The Meter can easily set the parameters of the controller. It can be flush mounted in a wall or surface mounted using the mounting frame(included). The MH-M80 is supplied with 3.3 ft (1.0 m) of cable(Can be extended), a mounting frame, and mounting screws. The MH-M80 connects to the RJ-45 port on the MPPT controller.	Remote Temperature Sensor: It is used to sense the environment's temperature. If the remote temperature sensor is not connected to the controller, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation. Put this sensor near the battery.

User's Manual

Product Description

MPPT Solar Charge Controller 100A EPEVER Tracer 10420AN

Based on common negative design and advanced MPPT control algorithm

MPPT Charge efficiency > 99%

Technical Data: Nominal system voltage:12/24/36/48VDC auto work

Rated charge current :100A

Battery input voltage range: 8-68V

Max. PV open circuit voltage:200V(at minimum operating environment temperature) 180V(at 25℃ environment temperature)

MPP voltage range:V(BAT)+2V～144V

Max. PV input power: 1250W/12V battery, 2500W/24V battery , 3750W/36V battery, 5000W/48V battery system

Max Wire Size: #2 AWG(35mm2)

Recommended Wire Size: #2 AWG(35mm2)

Weight: 7.4kg

MT50 Remote Meter

This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

Technical Data Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

 

EPEVER Tracer AN series mppt solar charge controller (100A)

Based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.

MSRT can give a very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system;

Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel.

The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.

 

 

   VIDEO DEMO

 Latest product information（For more product video please click here） 

User's Manual

Product Description

40A EPEVER Tracer 4210AN MPPT Solar Charge Controller

Based on common negative design and advanced MPPT control algorithm

MPPT Charge efficiency > 99%

 

Technical Data: Nominal system voltage:12/24VDC auto work

Rated charge current :40A

Rated discharge current: 40A

Battery input voltage range: 8-32V

Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)

MPP voltage range:V(BAT)+2V～72V

Max. PV input power:520W(12V Battery) & 1040W(24V battery)

Power terminals:#6 AWG(16mm2)

 

MT50 Remote Meter

This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

Technical Data Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

Something you should know for Lithium Batteries Charging

1. When a lithium-ion battery is used, the system voltage cannot be identified automatically, please confirm the battery system voltage before installation.
2. When you choose lithium battery as a battery type, the temperature compensate coefficient would be 0, and cannot be changed.
3. This MPPT solar charge controller can work under full load in the ambient temperature range. when the internal temperature reach 81℃, the power reduction mode will be turned on.
4. Lithium battery type can ONLY be set on a cellphone app or "solar station monitor" PC software.

Schematic Diagram

Warm tips：

Step: Connect the system in the order of 1.battery-->2. load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.

• NEVER connect the soalr panel array to the controller Without/Before a Battery.
• Battery must be connected FIRST !!!
• DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
• If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
• The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance. 

How to program for Lithium Battery？

1. Via PC (Accessories needed：RS485),
2. Via phone APP (Accessories needed：Ebox-Wifi or Ebox-Blue)
Software download website: EPever official website or look for in the manual

   VIDEO DEMO

 Latest product information（For more product video please click here） 

   VIDEO DEMO

 Latest product information（For more product video please click here） 

User's Manual

Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 100V 

 Features：

• Advanced MPPT technology, with efficiency no less than 99.5%
• Ultra-fast tracking speed and guaranteed tracking efficiency
• Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
• Wide MPP operating voltage range
• High quality components, perfecting system performance, with maximum conversion efficiency of 98%
• Accurate recognition and tracking of multiple-peaks maximum power point 
• International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life
• Charging power and current limitation function
• Compatible with lead-acid and lithium-ion batteries
• Battery temperature compensation function
• Real-time energy statistics function
• Overheating power reduction function
• Multiple load work modes
• The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection. 
• With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
• Monitor and set the parameters via mobile phone APP or PC software 
• Full-load operation without any drop in capacity within the range of working environment temperature 
• Extensive electronic protection

Electrical Parameters&nbsp

①When a lead-acid battery is used, the controller hasn’t the low temperature protection.

②At minimum operating environment temperature

③At 25℃ environment temperature

④When a lithium-ion battery is used, the system voltage can’t be identified automatically.

Mechanical Parameters

Description

• 100V PV Input & Compatiby with 12/24V Battery System
• Support 4 charging options: Sealed, Gel, Flooded and User.
• Wide MPP operating voltage range
• Maximum DC/DC transfer efficiency as high as 98.7%
• 100% Genuine MPPT

Product Description

Main Feature:

1. 12v/24v battery system compatibility.

2. Works with lead-acid batteries, lithium batteries.

3. Compatible with more units connected in parallel.

4. PV activation enabled to allow charging the battery even when the battery got protected due to LVD.

 

SolarEpic 60A MPPT Solar Charge Controller EM2460 100V PV

Technical Data

Battery System	12V/24V
Max Charging Current	60A
Max Discharging/Load Current	30A
Max PV Input	100V (Open Circuit Voltage)
Max Solar Panel Power	780W(12v battery system)/ 1560W (24V battery system)
Charging Stage	3
Battery Type	Sealed, Gel, Flooded and Lithium (LifePo4)
Max Wire Size	#3 gauge
Recommended wire size	#8 gauge

Product information

   Videos

MPPT solar charge controller,40A,30A,20A,12V/24VDC Auto.

Max PV input : 100V.

Meter : RM-5,LCD display,.

Product Overview:

1,This product can keep monitoring the solar panel's generating power and tracking the highest voltage and current values (VI) in real time, enabling the system to charge the battery in maximum power. It's designed to be used in off-grid solar photovoltaic systems to coordinate operation of the solar panel, battery and load, functioning as the core control unit in off-grid photovoltaic systems.

2,This product features an LCD screen which can dynamically display the operating status, operating parameters, controller logs, control parameters, etc. Users can conveniently check parameters by the keys, and modify control parameters to cater to different system requirements.

3,The controller utilizes standard Modbus communication protocol, making it easy for users to check and modify system parameters on their own. Besides, by providing free monitoring software, we give users the maximum convenience to satisfy their varied needs for remote monitoring.

4,With comprehensive electronic fault self-detecting functions and powerful electronic protection functions built inside the controller, component damage caused by installation errors or system failures can be avoided to the greatest extent possible.

Product Features:

◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method.  

◆ The product boasts an optimum MPPT tracking efficiency of up to 99.9%.

◆ Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%.

◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, lithium batteries, etc.

◆ LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults.

◆ Historical data storage function is available, and data can be stored for up to a year.

◆ The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also modify controller parameters. 

◆ The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.

◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.

◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery's service life. 

Electric Parameters:

Meter : RM-5,LCD display.

Product Features:

1) Adopts a 128*64 LCD screen, with the menus designed with numeric and graphic forms.

2) With a graphical design, the main menu is artistic as well as informative: it can display up to 10 parameters and states.

3) Able to read the historical data of a certain day.

4) A low-power-consumption BLE4.0 feature enables more powerful functions when pairing with a mobile APP (optional).

5) Employs two indicator lights to indicate controller abnormalities and communication errors respectively.

6) Features a controller abnormality voice alarm function which can be switched on/ off.

7) A backlight time setting function is available.

8) Able to monitor live data and operating statuses of the controller .On/ off switching, clearing of historical data and restoring to factory settings can all be done with this unit.

9) Adoption of standard Modbus communication protocol.

10) Features standard RJ12 as the communication interface.

11) With no need of an external power source, connection with a controller by means of a data cable will be enough to enable the unit to be powered .

12) Boasts an industrial grade design and excellent anti-interference capacity, the product can function well in various tough conditions.

 Function Descriptions:

With the menus and operations on the navigation keys, the following functions can be realized:

1) Real-time monitoring and checking of live data, charging and discharging parameters, load state, fault codes, historical data, device information, etc. of an individual controller;

2) Setting of related charging and discharging parameters;

3) Load mode setting, load on/ off switching (manual mode);

4) With the optional bluetooth-version display unit, more powerful functions can be realized with the help of a mobile App. (Model: RM-5B)