Accessories&Tools7 Products
Description
This adapter is used to monitor each controller on the network using
1. Remote Temperature Sensor
Model: RTS300R47K3.81A
Acquisition of battery temperature for undertaking
temperature compensation of control parameters
Length: 3 M
2. USB to RS485 Converter Adapter
Model: CC-USB-RS485-150U
Feature:
Compatible with PC software & MT50 for real-time monitoring
Connect to PC via USB interfaces with high compatibility
Powered up by controller communication interface
Record capacity: 20000 points(MAX)
LED Indicator design, more intuitive display
technical parameter
Model |
eLOG01 |
Input voltage |
4~10VDC Powered up by RS485 interface |
Average power consumption |
0.3W |
Baud rate |
115200 |
Communication |
RS485 |
Interface type |
2 RJ45 1 Micro USB |
Record time |
10 minutes |
Dimensions |
71×67.62×25.8mm |
Mounting dimension |
57.6mm |
Mounting hole size |
Φ4.5 |
Working temperature |
-25℃~75℃ |
Humidity |
5-95% (N.C.) |
Enclosure |
IP30 |
Net weight |
42g |
Warranty |
2 years |
The MT series remote meter is an accessory which is compatible with the DuoRacer series controller. It can monitor the running data and working status of the controller via the remote meter. The remote meter can browse the controller’s parameters, set the battery typeand temperature unit, and clean the generated energy.It is suitable for RV, Camper, Boat, and so on.
Recommendations
- The MT11 is only allowed to connect with DR N series charge controller.Please confirm before purchase and installation.
- Pleasedo not install MT11 in a situation with strong electromagnetic
Features:
- Automatically identify and display the type,model and relevant parameterdata of controllers.
- Real-timedisplay the operational data and working status of the connected devices indigital,graphics and textual forms by a large-screen multifunction LCD.
- Three touch buttons are easy and quick to operate.
- No need for external power supply. Charge controller supply the power for MT11.
- It can browse the controller’s parameters, set the battery typeand temperatureunit, and clean the generated energy.
- Real-time display of failure information of the connecteddevices.
- Longer communication distance based on RS485.
Technical Specifications
Model |
MT11 |
Apply to model |
DRN series |
Self-consumption(Power on) |
13mA/5Vdc |
Self-consumption(Power off) |
4mA |
Communication way |
RS485 |
Communication port |
3.81-4P |
RS485 cable |
CC-RS485-RS485-3.81-4P-150(1.5m) CC-RS485-RS485-3.81-4P-500(5m) CC-RS485-RS485-3.81-4P-1000(10m) |
Environment temperature |
-20℃~+70℃ |
Storage temperature range |
-20℃~+70℃ |
Enclosure |
IP20 |
Dimension |
98.4×98.4mm |
Base cover dimension |
114×114mm |
Weight |
0.11kg |
Front View
LCD display screen
Man-machine interaction operation interface.
Buttons
The meter buttons include two function buttons and one switch button.
|
Press the button |
1.PV array parameters 2.Storage battery parameters 3.Browse the start battery parameters automatically ( |
|
Press the button |
Browse the PV array parameters Browse the Storage battery parameters Browse the start battery parameters |
Press the button and hold on 5s |
Temperature unitsBattery type |
|
|
Press the button |
The meter is powered ON |
Press the button and hold on 5s |
The meter is powered OFF |
Rear View
- RS485communicationport
It is used to connect the controller which Power the MT11.
- Communicationcable’s models
CC-RS485-RS485-3.81-4P-150(Included)
CC-RS485-RS485-3.81-4P-1000(Optional)
CC-RS485-RS485-3.81-4P-2000(Optional)
-
Pins definition
PIN |
Definition |
1 |
DC5V |
2 |
RS-485-B |
3 |
RS-485-A |
4 |
GND |
LCD display
Icon |
Instruction |
Icon |
Instruction |
|
BATT1 battery capacity level①0~12% |
|
BATT2battery capacity level①0~12% |
|
BATT1battery capacity level①13%~35% |
|
BATT2battery capacity level①13%~35% |
|
BATT1battery容量水平① 36%〜61% |
|
BATT2battery capacity level①36%~61% |
|
BATT1battery capacity level①62%~86% |
|
BATT2battery capacity level①62%~86% |
|
BATT1battery capacity level① 87%~100% |
|
BATT2battery capacity level① 87%~100% |
|
Day |
|
PV array |
![]() |
Night |
|
BATT1 charging icon |
|
Display the parameters of PV |
|
BATT2charging icon |
|
Display the parameters of BATT1 |
|
BATT1temperature parameters |
|
Display the parameters of BATT2 |
|
AES signal icon |
|
Setting icon |
|
Battery type icon |
|
Auto global view sign |
|
Minimum voltage icon |
|
Fault Icon |
|
Maximum voltage icon |
①Battery power capacity is calculated by the linear relationship between the disconnect voltage of low voltage and float charging voltage.
Note : just can be use for ANDROID phone,
CAN'T be use for iPHONE.
APK Download:Epever(WIFI&BLE)
Feature:
- Realize wireless monitoring function of solar controller and inverter
- Support mobile phone APP, plug and play, simple and convenient to set
- Use high performance, ultra-low power consumption Bluetooth dedicated chip
- Adopt Bluetooth 4.0 and BLE technology
- Fast communication, strong anti-interference ability
- No need of external power supply
- Communication distance up to 10 m
- Master reset adapter
eBox-WIFI-01
- Realize wireless monitoring function of solar controller and inverter
- Support mobile phone APP, plug and play, simple and convenient to set
- Use high performance CPU with core M4
- Ultra-low power consumption and high speed data processing capability
- No need of external power supply
- Communication distance up to 50 m
- One-key restore the factory settings
Technical Specifications
Model→ Item↓ |
eBox-BLE-01 |
eBox-WIFI-01 |
Input Voltage |
5VDC (Direct powered by RS485 port ) |
5VDC (Direct powered by RS485 port ) |
Standby power Consumption |
0.04W |
0.20W |
Operation power consumption |
0.05W |
0.25W |
Communication distance |
≤10m |
≤50m |
Port baud rate |
300bps~230400bps (Default115200) |
300bps~230400bps (Default 115200) |
Communication |
RS485 to BLE |
RS485 to WIFI |
Interface type |
RJ45 |
RJ45 |
Connecting cable |
Standard network cable (Parallel cable) |
Standard network cable (Parallel cable) |
Overall dimension |
51*67*24.5mm |
51*67*24.5mm |
Mounting dimension |
41.2mm |
41.2mm |
Mounting hole size |
Φ3.2mm |
Φ3.2mm |
Working temperatur |
-20~70℃ |
-35~75℃ |
Enclosure |
IP30 |
IP30 |
Net weight |
37g |
39g |
SolarEpic MT50 LCD Remote Meter Suitable For Tracer-AN/Tracer-BN Charge Controller Epever
Note : This kind of meter just can be use for epever controller,can't be use for
renogy or hqst controller.
Features:
data of controllers;
■ Real-time display the operational data and working status of the connection devices in digital, graphic and textual forms by a large-screen multifunction LCD;
■ Direct, convenient and rapid operation of six navigation function keys;
■ Both data and power flowing on the same lead, no need for external power;
■ Real-time data monitoring and remote load switchover of the controllers, and data browse and modification of device parameters, charge control parameters and load control parameters;
■ Real-time display and acoustic alarm of failure information of the connection devices;
■ Longer communication distance based on RS485.
Electrical Parameters
Faceplate dimensions |
98×98 mm |
Frame dimensions |
114×114 mm |
Connector type |
RJ45 |
Meter cable |
Standard 2m,Max 50 m |
Meter weight |
Simple package: 0.23 Kg Standard package:0.32 Kg |
Ambient temperature |
-20℃~+70℃ |
The precision compression module and the overall locking (self release mechanical device) are designed to ensure that the quality of the press can be maintained in repeated compression.
Other info
Model |
H03 |
suitable object |
cable |
effect |
Break,tighten,strip,press
|
character |
general |
texture |
chisel tool steel |
style |
German-style |