USA Warehouse

User's Manual 

Product Description

Prolong The Life Of Your Battery!

The smart battery protection system shields your device from getting over charged, over load, discharge, over heated, reverses polarity and also provides efficient short circuit protection. It can handle 520W Solar Panel on 12v battery system or 1040W Solar Panel on 24v battery system. Works equally great for home, industrial or commercial use. Designed for optimum and safe charging performance.

Technical Data

40A MPPT Charge Controller Nominal System Voltage: 12V, 24V

Rated Charge Current: 40A

Rated Load Current: 20A

Max PV Open Circuit Voltage: 150V / 138V

Max PV Input Power: 520W (12v battery) / 1040W (24v battery)

MT50 Remote Meter Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

Remote Temperature Sensor Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M

USB to RS485 Converter Adapter This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware.

SolarEpic Tracer4215BN 40amp Solar Charge Controller Feature:

 

1. Negative Grounding, 150V /138V PV Input
2. Metal Case allows for natural heat dissipation
3. Support 4 charging options: Sealed, Gel, Flooded and User
4. 4 Stage Charging
5. Serial connection (string) of PV modules allows minimize the charging current as a way of saving the energy
6. Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
7. Ultra-fast tracking speed and tracking efficiency
8. Features Standard Modbus Interface with RS485 Port

 

MPPT Solar Charge Controller 40A Tracer4215BN Schematic Diagram

SolarEpic 4215BN Solar Charge Controller 40A: Built with advanced power tracking technology to optimize the working of your solar charger system. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. It supports over four charging options: sealed, gel, flooded and user-defined. Battery parameters can be set using the attached MT50 remote meter.	MT50 Remote Meter: Wide LED screen displays the real time operational data and the working status in digital, graphic and textual forms. Basically used for monitoring and setting the controller, it automatically identifies the type, model and relevant parameter data of solar controllers.	Battery Temperature Sensor and PC Communication Cable: It is used to monitor each controller on the network using Solar Station PC software and update the firmware. Measures 3m and works great for Tracer BN/A series MPPT charge controller. The connectors are well made to secure the connection.

   VIDEO DEMO

 Latest product information（For more product video please click here） 

User's Manual

This combination include following items：

EPEVER Tracer AN MPPT Solar Charge Controller

Based on common negative design and advanced MPPT control algorithm

MPPT Charge efficiency > 99%

MT50 Remote Meter

This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

Battery Temperature Sensor&Monitoring adapter

 Remote Temperature Sensor 
Model: RTS300R47K3.81A 
Acquisition of battery temperature for undertaking 
temperature compensation of control parameters 
Length: 3 M

USB to RS485 Converter Adapter 
Model: CC-USB-RS485-150U 

 Warm tips

Step Always connect the battery before connect the solar panel,disconnect in the reverse order.

Step: Connect the system in the order of 1. battery--> 2. load-->3. PV array, and disconnect the system in the reverse order 3. 2. 1.

   VIDEO DEMO

 Latest product information（For more product video please click here） 

User's Manual

This combination include following items：

EPEVER Tracer AN MPPT Solar Charge Controller

Based on common negative design and advanced MPPT control algorithm

MPPT Charge efficiency > 99%

MT50 Remote Meter

This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

Battery Temperature Sensor&Monitoring adapter

Remote Temperature Sensor 
Model: RTS300R47K3.81A 
Acquisition of battery temperature for undertaking 
temperature compensation of control parameters 
Length: 3 M 

USB to RS485 Converter Adapter 
Model: CC-USB-RS485-150U 

• 12 / 24VDC automatically identifying system voltage
• Rated charge current: 40A
• Max Input Power: 12V @ 520W | 24V @ 1040W
• Max PV open circuit voltage:100VDC (92V at 25℃ temperature)
• Battery type selection: lead-acid (Gel, Sealed, Flooded) and Lithium
• Charging Power and Current Limitation Function
• User programmable for battery types, load control etc.
• Accurately recognizing and tracking of multiple power point
• PV short circuit / PV reverse polarity /Battery over voltage /Battery over discharge / Battery reverse polarity / Load overload protection

Schematic Diagram

Warm tips：

Step: Connect the system in the order of 1.battery-->2. load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.

• NEVER connect the soalr panel array to the controller Without/Before a Battery.
• Battery must be connected FIRST !!!
• DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
• If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
• The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance. 

How to program for Lithium Battery？

1. Via PC (Accessories needed：RS485),
2. Via phone APP (Accessories needed：Ebox-Wifi or Ebox-Blue)
Software download website: EPever official website or look for in the manual

   VIDEO DEMO

 Latest product information（For more product video please click here） 

Send from USA,2-8 working days delivery with tracking.

1300W grid tie inverter,DC18V or 24V to AC110V or 220V pure sine wave inverter.

MPPT solar inverter,50/60hz auto,CE.

Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system.

The output need to be connected to the grid power. Can not supply power directly to the AC loads.

Warranty

1 Years Warranty

What's In Box

• 1 x 1300W Grid Tie Inverter
• 1 x User's Manaul
• 1 x AC Cord (US)

User's Manual

Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer BN Series Max Input 150V 4215BN | 3215BN | 2215BN | 1215BN

The Tracer-BN series controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging.

The battery charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the Tracer-BN series controller has a RJ45 interface to allow communication with other accessory.

Feature:

• 12V/24V automatic identify or user-defined working voltage.
• Excellent heat dissipation. Using the integration of cast aluminum radiator shell, the controller can be natural cooling.
• Advanced maximum power point tracking technology to optimize using the solar system. Peak conversion efficiency is as high as 98%.
• Lock the MP point fast and the controller provides the industry’s highest tracking efficiency of 99%.
• Widely used, automatic recognize day or night.
• Several load methods are supported to convenient for different demand.
• Support 4 charging options: Sealed, Gel, Flooded and User-defined.
• Adopting temperature compensation and correcting the charging and discharging parameters automatically, improving the battery lifetime.
• Protection: over temperature, over charging, PV and load short, PV (battery) revered, over current protection.
• Actual power convenient and record function makes convenience to check the datum every day, every month and every year.
• RS-485 ports via the open standard Modbus protocol are supported to meet different occasion of demand.
• With supporting PC monitoring software and remote meter MT50, it is convenient to check the real-time data of controllers and set the parameters.
• Support firmware update.

Electrical&Environmental Parameters

Environmental Parameters:

User's Manual

Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 100V 

 Features：

• Advanced MPPT technology, with efficiency no less than 99.5%
• Ultra-fast tracking speed and guaranteed tracking efficiency
• Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
• Wide MPP operating voltage range
• High quality components, perfecting system performance, with maximum conversion efficiency of 98%
• Accurate recognition and tracking of multiple-peaks maximum power point 
• International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life
• Charging power and current limitation function
• Compatible with lead-acid and lithium-ion batteries
• Battery temperature compensation function
• Real-time energy statistics function
• Overheating power reduction function
• Multiple load work modes
• The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection. 
• With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
• Monitor and set the parameters via mobile phone APP or PC software 
• Full-load operation without any drop in capacity within the range of working environment temperature 
• Extensive electronic protection

Electrical Parameters&nbsp

①When a lead-acid battery is used, the controller hasn’t the low temperature protection.

②At minimum operating environment temperature

③At 25℃ environment temperature

④When a lithium-ion battery is used, the system voltage can’t be identified automatically.

Mechanical Parameters

User's Manual

Description

Based on common negative design and advanced MPPT control algorithm

MPPT Charge efficiency > 99%

Technical Data: Nominal system voltage:12/24VDC auto work

Rated charge current :20A

Rated discharge current: 20A

Battery input voltage range: 8-32V

Max. PV open circuit voltage:60V(at minimum operating environment temperature) 46V(at 25℃ environment temperature)

MPP voltage range:V(BAT)+2V～72V

Max. PV input power:260W(12V Battery) & 520W(24V battery)

Power terminals:#12 AWG(4mm2)

MT50 Remote Meter

This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

Technical Data Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

 

SolarEpic 2206AN Solar Charge Controller 20A:

The controller adopts the three-stage charging mode, and

has perfect electronic protection function, which can

effectively extend the battery life, improve the system

performance, and ensure the system safety, stability and

long-term operation. TRIRION controller can be widely used

in RV, telecommunication base station, household system,

field monitoring, etc.

 

Product Features

• Advanced MPPT technology, with efficiency no less than 99.5%

• Monitor and set the parameters via mobile phone APP or PC software

• Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time

• Wide MPP operating voltage range

• High quality components, perfecting system performance, with maximum conversion efficiency of 98%

•Accurate recognition and tracking of multiple-peaks maximum power point

• International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life

• Charging power and current limitation function

• Compatible with lead-acid and lithium-ion batteries

Maximum Power Point Tracking Technology

Due to the nonlinear characteristics of solar array, there is a maximum energy output point (Max Power Point) on its curve. Traditional controllers, with switch charging technology and PWM charging technology, can’t charge the battery at the maximum power point, so can’t harvest the maximum energy available from PV array, but the solar charge controller with Maximum Power Point Tracking (MPPT) Technology can lock on the point to harvest the maximum energy and deliver it to the battery

The MPPT algorithm of our company continuously compares and adjusts the operating points to attempt to locate the maximum power point of the array. The tracking process is fully automatic and does not need user adjustment.

As the Figure 1-2, the curve is also the characteristic curve of the array, the MPPT technology will ‘boost’ the battery charge current through tracking the MPP. Assuming 100% conversion efficiency of the solar system, in that way, the following formula is established:

Product information

Item	Tracer1206AN Tracer1210AN	Tracer2206AN Tracer2210AN			Tracer3210AN		Tracer4210AN
Dimension	172x139 x 44mm	220x154x 52mm			228x164x55mm		252x180x63mm
Mounting dimension	130x130mm	170x145mm			170x164mm		210x171mm
Mounting hole size	Φ5mm
Terminal	12AWG(4mm2)		6AWG(16mm2)	6AWG(16mm2)		6AWG(16mm2)
Recommended cable	12AWG(4mm2)		10AWG(6mm2)	8AWG(10mm2)		6AWG(16mm2)
Weight	0.57kg		0.94kg	1.26kg		1.65kg

User's Manual

Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 150V /200V

Tracer-AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer-AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.

Features:

• High quality and low failure rate components of ST and IR ensure the product’s service life
• 100% charging and discharging in working environment temperature range
• Maximum DC/DC transfer efficiency as high as 98.7%
• Advanced MPPT technology & ultra-fast tracking speed guarantee tracking up to 99.5%
• Advanced MPPT control algorithm minimize the MPP loss rate and loss time
• Accurate recognition and tracking of multiple-peaks maximum power point
• Wide MPP operating voltage range
• Limit the charging power and current over rated value
• Support 4 charging options: Sealed, Gel, Flooded and User.
• Battery temperature compensation function
• Real-time energy statistics function
• Automatic over-temperature power reduction function
• Load relay control to realize diversified load work modes
• Auto-control of utility and generator relay design
• Remote temperature sensor and remote voltage sensor design, collect more accurate data of battery temperature and voltage value
• Isolated RS-485 with 5VDC/200Ma protected output for no power devices, with MODBUS protocol
• Monitor and set the parameters via mobile phone APP or PC software

Parameters