Inverter/Charger

Inverter/Charger7 Products

Category
  • Accessories&Tools (17)
  • Best selling (19)
  • Epever MPPT Controller (20)
  • Feature Products (12)
  • Gird tie inverter (16)
  • Inverter (27)
  • Inverter/Charger (7)
  • MC4 Connectors (7)
  • MC4 Connectors (2)
  • MPPT Solar Charger Controller (12)
  • Off tie inverter (2)
  • PWM Solar Charger Controller (1)
  • Tool (0)
  • US warehouse (0)
  • USA Warehouse (24)
  • Waterproof Grid tie inverter (5)
-5%
$538.99 $568.00
Description

1000W Epever MPPT UPower Inverter/Charger , DC12V or 24V to AC220V/230V.

50Hz/60Hz Auto,Pure sine wave.


Product models:

12V : 1000W,max pv input 60V,Max. PV charging current 30A,Max. PV input power 390W.

24V : 1000W,max pv input 100V,Max. PV charging current 30A,Max. PV input power 780W.


 UPower SERIES Inverter/Charger

 The UPower series is a new type of the inverter/ charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.

 

Two OUTPUT mode:

Utility; Battery;

 

Four charging mode:

Solar priority;

Utility priority;

Utility&Solar

Solar;

 

 Features

  • Adoption of the advanced SPWM technology, with pure sine wave output
  • Fully digitalized voltage and current double closed-loop control
  • Advanced MPPT technology, with efficiency no less than 99.5%.
  • Four charging mode: Solar priority, Utility priority, Utility & solar and Solar
  • LCD design that enables dynamic display of system running data and operating state
  • Two OUTPUT mode: Battery and Utility
  • Provided with common interface and advanced interface
  • Multiple LED indicators that instantly indicate the operating state of the system
  • 2P circuit breaker provided at the utility input end
  • Independent control of AC output with AC OUT button
  • Battery temperature compensation function.
  • Extensive Electronic protection


Protection function

  • PV Over Current protection
  • PV short circuit protection
  • PV Reverse Polarity protection
  • Night Reverse Charging protection
  • Utility input overvoltage protection
  • Battery overvoltage protection
  • Utility input under voltage protection
  • Battery Over Discharge protection
  • Load Short Circuit protection
  • Load Overload protection
  • Device overheating protection


Technical Specifications
GO   VIDEO DEMO
    -6%
    $1,033.00 $1,100.00
    Description

    5000W Epever MPPT UPower Inverter/Charger , DC48V to AC220V/230V.

    50Hz/60Hz Auto,Pure sine wave.


    Product models:

    UP5000-M6342 : 5000W,max pv input 150V,Max. PV charging current 60A,Max. PV input power 3000W.

    UP5000-M8342 : 5000W,max pv input 200V,Max. PV charging current 80A,Max. PV input power 4000W.

    UP5000-M10342 : 5000W,max pv input 200V,Max. PV charging current 100A,Max. PV input power 5000W.


     UPower SERIES Inverter/Charger

     The UPower series is a new type of the inverter/ charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.

     

    Two OUTPUT mode:

    Utility; Battery;

     

    Four charging mode:

    Solar priority;

    Utility priority;

    Utility&Solar

    Solar;

     

     Features

    • Adoption of the advanced SPWM technology, with pure sine wave output
    • Fully digitalized voltage and current double closed-loop control
    • Advanced MPPT technology, with efficiency no less than 99.5%.
    • Four charging mode: Solar priority, Utility priority, Utility & solar and Solar
    • LCD design that enables dynamic display of system running data and operating state
    • Two OUTPUT mode: Battery and Utility
    • Provided with common interface and advanced interface
    • Multiple LED indicators that instantly indicate the operating state of the system
    • 2P circuit breaker provided at the utility input end
    • Independent control of AC output with AC OUT button
    • Battery temperature compensation function.
    • Extensive Electronic protection


    Protection function

    • PV Over Current protection
    • PV short circuit protection
    • PV Reverse Polarity protection
    • Night Reverse Charging protection
    • Utility input overvoltage protection
    • Battery overvoltage protection
    • Utility input under voltage protection
    • Battery Over Discharge protection
    • Load Short Circuit protection
    • Load Overload protection
    • Device overheating protection


    Technical Specifications

    GO   VIDEO DEMO


      -5%
      $633.99 $668.00

      3000W Epever MPPT UPower Inverter/Charger , DC24V or 48V to AC220V/230V.

      50Hz/60Hz Auto,Pure sine wave.


      Product models:

      UP3000-M3322 : 3000W-24V,max pv input 100V,Max. PV charging current 30A,Max. PV input power 780W.

      UP3000-M6322 : 3000W-24V,max pv input 150V,Max. PV charging current 60A,Max. PV input power 1500W.

      UP3000-M2142 : 3000W-48V,max pv input 150V,Max. PV charging current 20A,Max. PV input power 1040W.

      UP3000-M6142 : 3000W-48V,max pv input 150V,Max. PV charging current 60A,Max. PV input power 3000W.


       UPower SERIES Inverter/Charger

       The UPower series is a new type of the inverter/ charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.

       

      Two OUTPUT mode:

      Utility; Battery;

       

      Four charging mode:

      Solar priority;

      Utility priority;

      Utility&Solar

      Solar;

       

       Features

      • Adoption of the advanced SPWM technology, with pure sine wave output
      • Fully digitalized voltage and current double closed-loop control
      • Advanced MPPT technology, with efficiency no less than 99.5%.
      • Four charging mode: Solar priority, Utility priority, Utility & solar and Solar
      • LCD design that enables dynamic display of system running data and operating state
      • Two OUTPUT mode: Battery and Utility
      • Provided with common interface and advanced interface
      • Multiple LED indicators that instantly indicate the operating state of the system
      • 2P circuit breaker provided at the utility input end
      • Independent control of AC output with AC OUT button
      • Battery temperature compensation function.
      • Extensive Electronic protection


      Protection function

      • PV Over Current protection
      • PV short circuit protection
      • PV Reverse Polarity protection
      • Night Reverse Charging protection
      • Utility input overvoltage protection
      • Battery overvoltage protection
      • Utility input under voltage protection
      • Battery Over Discharge protection
      • Load Short Circuit protection
      • Load Overload protection
      • Device overheating protection
      Technical Specifications
      GO   VIDEO DEMO


        -5%
        $553.99 $584.00
        Description

        1500W/2000W Epever MPPT UPower Inverter/Charger , DC24V to AC220V/230V.

        50Hz/60Hz Auto,Pure sine wave.


        Product models:

        UP1500-M3222 : 1500W,max pv input 100V,Max. PV charging current 30A,Max. PV input power 780W.

        UP2000-M3322 : 2000W,max pv input 100V,Max. PV charging current 30A,Max. PV input power 780W.


         UPower SERIES Inverter/Charger

         The UPower series is a new type of the inverter/ charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.

         

        Two OUTPUT mode:

        Utility; Battery;

         

        Four charging mode:

        Solar priority;

        Utility priority;

        Utility&Solar

        Solar;

         

         Features

        • Adoption of the advanced SPWM technology, with pure sine wave output
        • Fully digitalized voltage and current double closed-loop control
        • Advanced MPPT technology, with efficiency no less than 99.5%.
        • Four charging mode: Solar priority, Utility priority, Utility & solar and Solar
        • LCD design that enables dynamic display of system running data and operating state
        • Two OUTPUT mode: Battery and Utility
        • Provided with common interface and advanced interface
        • Multiple LED indicators that instantly indicate the operating state of the system
        • 2P circuit breaker provided at the utility input end
        • Independent control of AC output with AC OUT button
        • Battery temperature compensation function.
        • Extensive Electronic protection


        Protection function

        • PV Over Current protection
        • PV short circuit protection
        • PV Reverse Polarity protection
        • Night Reverse Charging protection
        • Utility input overvoltage protection
        • Battery overvoltage protection
        • Utility input under voltage protection
        • Battery Over Discharge protection
        • Load Short Circuit protection
        • Load Overload protection
        • Device overheating protection
        Technical Specifications

        GO   VIDEO DEMO
          -7%
          $979.99 $1,050.00
          Description


          Epever UPower-Hi Inverter/Charger AC to DC MPPT Hybrid Inverter Charger 


          DC24V/48V to AC110V/220V,50hz/60hz auto.


          5000W,3000W,2000W


          Max pv input voltage : 200v~500v.



          UPower-Hi, an upgrade hybrid inverter charger, supports utility charging, oil generator charging, solar charging, utility output, inverter output, and energy management. The DSP chip in the product with an advanced control algorithm brings high response speed and high conversion efficiency. In addition, this product adopts an industrial design to ensure high reliability and features multiple charging and output modes.

          The new optimized MPPT charging technology fastly tracks the solar panels' max power point in any situation and obtains the maximum energy in real-time.

          The AC to DC charging process adopts the advanced control algorithm to realize a full digital PFC and dual closed-loop control of voltage and current. As a result, the DC output charging voltage and current are continuously adjustable within a specific range.

          The DC to AC inverting process, based on a fully smart digital design, adopts advanced SPWM technology to get a pure sine wave output. The inverting process converts the DC power to AC power, suitable for household appliances, power tools, industrial equipment, audio systems, and other electronics.

          The 4.2-inch LCD shows the operational status and full parameters.

          To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can increase the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.


          Features:

          Ÿ   Full intelligent digital energy storage equipment

          Ÿ   Supports the battery mode or non-battery mode

          Ÿ   Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously

          Ÿ   (Optional) Surge and reverse connection protections to support the lithium battery system perfectly

          Ÿ   Advanced SPWM technology and pure sine wave output

          Ÿ   PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage

          Ÿ   Full digital double closed-loop control

          Ÿ   High tracking efficiency of MPPT no less than 99.5%

          Ÿ   Three charging modes: Solar only, Solar priority, Utility & Solar

          Ÿ   Two AC output modes: Utility priority and Inverter priority

          Ÿ   Self-learning SOC display function

          Ÿ   Multiple LED indicators to dynamic display the status

          Ÿ   AC OUT button to control the AC output directly

          Ÿ   4.2 inch LCD to monitor and modify system parameters

          Ÿ   Remote temperature compensation for batteries

          Ÿ   Optional WiFi or GPRS Remote control by the RS485 isolated com. port

          Ÿ   Optional BMS-Link port, taking the charging and discharging control from BMS

          Ÿ   Customized charging current and discharging limited current

          Ÿ   Supports cold start and soft start

          Ÿ   Comprehensive electronic protection features


          Specifications:

          GO   VIDEO DEMO

            Quick look
            -5%
            $899.00 $950.00
            Description


            Epever UPower-Hi Inverter/Charger AC to DC MPPT Hybrid Inverter Charger 


            DC24V/48V to AC110V/220V,50hz/60hz auto.


            5000W,3000W,2000W


            Max pv input voltage : 200v~500v.



            UPower-Hi, an upgrade hybrid inverter charger, supports utility charging, oil generator charging, solar charging, utility output, inverter output, and energy management. The DSP chip in the product with an advanced control algorithm brings high response speed and high conversion efficiency. In addition, this product adopts an industrial design to ensure high reliability and features multiple charging and output modes.

            The new optimized MPPT charging technology fastly tracks the solar panels' max power point in any situation and obtains the maximum energy in real-time.

            The AC to DC charging process adopts the advanced control algorithm to realize a full digital PFC and dual closed-loop control of voltage and current. As a result, the DC output charging voltage and current are continuously adjustable within a specific range.

            The DC to AC inverting process, based on a fully smart digital design, adopts advanced SPWM technology to get a pure sine wave output. The inverting process converts the DC power to AC power, suitable for household appliances, power tools, industrial equipment, audio systems, and other electronics.

            The 4.2-inch LCD shows the operational status and full parameters.

            To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can increase the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.


            Features:

            Ÿ   Full intelligent digital energy storage equipment

            Ÿ   Supports the battery mode or non-battery mode

            Ÿ   Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously

            Ÿ   (Optional) Surge and reverse connection protections to support the lithium battery system perfectly

            Ÿ   Advanced SPWM technology and pure sine wave output

            Ÿ   PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage

            Ÿ   Full digital double closed-loop control

            Ÿ   High tracking efficiency of MPPT no less than 99.5%

            Ÿ   Three charging modes: Solar only, Solar priority, Utility & Solar

            Ÿ   Two AC output modes: Utility priority and Inverter priority

            Ÿ   Self-learning SOC display function

            Ÿ   Multiple LED indicators to dynamic display the status

            Ÿ   AC OUT button to control the AC output directly

            Ÿ   4.2 inch LCD to monitor and modify system parameters

            Ÿ   Remote temperature compensation for batteries

            Ÿ   Optional WiFi or GPRS Remote control by the RS485 isolated com. port

            Ÿ   Optional BMS-Link port, taking the charging and discharging control from BMS

            Ÿ   Customized charging current and discharging limited current

            Ÿ   Supports cold start and soft start

            Ÿ   Comprehensive electronic protection features


            Specifications:

            GO   VIDEO DEMO
              -5%
              $825.00 $870.00
              Description


              Epever UPower-Hi Inverter/Charger AC to DC MPPT Hybrid Inverter Charger 


              DC24V/48V to AC110V/220V,50hz/60hz auto.


              5000W,3000W,2000W


              Max pv input voltage : 200v~500v.



              UPower-Hi, an upgrade hybrid inverter charger, supports utility charging, oil generator charging, solar charging, utility output, inverter output, and energy management. The DSP chip in the product with an advanced control algorithm brings high response speed and high conversion efficiency. In addition, this product adopts an industrial design to ensure high reliability and features multiple charging and output modes.

              The new optimized MPPT charging technology fastly tracks the solar panels' max power point in any situation and obtains the maximum energy in real-time.

              The AC to DC charging process adopts the advanced control algorithm to realize a full digital PFC and dual closed-loop control of voltage and current. As a result, the DC output charging voltage and current are continuously adjustable within a specific range.

              The DC to AC inverting process, based on a fully smart digital design, adopts advanced SPWM technology to get a pure sine wave output. The inverting process converts the DC power to AC power, suitable for household appliances, power tools, industrial equipment, audio systems, and other electronics.

              The 4.2-inch LCD shows the operational status and full parameters.

              To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can increase the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.


              Features:

              Ÿ   Full intelligent digital energy storage equipment

              Ÿ   Supports the battery mode or non-battery mode

              Ÿ   Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously

              Ÿ   (Optional) Surge and reverse connection protections to support the lithium battery system perfectly

              Ÿ   Advanced SPWM technology and pure sine wave output

              Ÿ   PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage

              Ÿ   Full digital double closed-loop control

              Ÿ   High tracking efficiency of MPPT no less than 99.5%

              Ÿ   Three charging modes: Solar only, Solar priority, Utility & Solar

              Ÿ   Two AC output modes: Utility priority and Inverter priority

              Ÿ   Self-learning SOC display function

              Ÿ   Multiple LED indicators to dynamic display the status

              Ÿ   AC OUT button to control the AC output directly

              Ÿ   4.2 inch LCD to monitor and modify system parameters

              Ÿ   Remote temperature compensation for batteries

              Ÿ   Optional WiFi or GPRS Remote control by the RS485 isolated com. port

              Ÿ   Optional BMS-Link port, taking the charging and discharging control from BMS

              Ÿ   Customized charging current and discharging limited current

              Ÿ   Supports cold start and soft start

              Ÿ   Comprehensive electronic protection features


              Specifications:

              GO   VIDEO DEMO

                Search

                Just added to your cart:
                Qty:
                Total:
                Subtotal:
                Excl. postage 
                My Bag
                Just added to your wishlist:
                Excl. postage 
                My Wishlist

                Join Our Mailing List

                Spin to win Spinner icon