Inverter29 Products
Description
Epever UPower-Hi Inverter/Charger AC to DC MPPT Hybrid Inverter Charger
DC24V/48V to AC110V/220V,50hz/60hz auto.
5000W,3000W,2000W
Max pv input voltage : 200v~500v.
UPower-Hi, an upgrade hybrid inverter charger, supports utility charging, oil generator charging, solar charging, utility output, inverter output, and energy management. The DSP chip in the product with an advanced control algorithm brings high response speed and high conversion efficiency. In addition, this product adopts an industrial design to ensure high reliability and features multiple charging and output modes.
The new optimized MPPT charging technology fastly tracks the solar panels' max power point in any situation and obtains the maximum energy in real-time.
The AC to DC charging process adopts the advanced control algorithm to realize a full digital PFC and dual closed-loop control of voltage and current. As a result, the DC output charging voltage and current are continuously adjustable within a specific range.
The DC to AC inverting process, based on a fully smart digital design, adopts advanced SPWM technology to get a pure sine wave output. The inverting process converts the DC power to AC power, suitable for household appliances, power tools, industrial equipment, audio systems, and other electronics.
The 4.2-inch LCD shows the operational status and full parameters.
To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can increase the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.
Features:
Full intelligent digital energy storage equipment
Supports the battery mode or non-battery mode
Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously
(Optional) Surge and reverse connection protections to support the lithium battery system perfectly
Advanced SPWM technology and pure sine wave output
PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage
Full digital double closed-loop control
High tracking efficiency of MPPT no less than 99.5%
Three charging modes: Solar only, Solar priority, Utility & Solar
Two AC output modes: Utility priority and Inverter priority
Self-learning SOC display function
Multiple LED indicators to dynamic display the status
AC OUT button to control the AC output directly
4.2 inch LCD to monitor and modify system parameters
Remote temperature compensation for batteries
Optional WiFi or GPRS Remote control by the RS485 isolated com. port
Optional BMS-Link port, taking the charging and discharging control from BMS
Customized charging current and discharging limited current
Supports cold start and soft start
Comprehensive electronic protection features
Specifications:
VIDEO DEMO
Description
Epever UPower-Hi Inverter/Charger AC to DC MPPT Hybrid Inverter Charger
DC24V/48V to AC110V/220V,50hz/60hz auto.
5000W,3000W,2000W
Max pv input voltage : 200v~500v.
UPower-Hi, an upgrade hybrid inverter charger, supports utility charging, oil generator charging, solar charging, utility output, inverter output, and energy management. The DSP chip in the product with an advanced control algorithm brings high response speed and high conversion efficiency. In addition, this product adopts an industrial design to ensure high reliability and features multiple charging and output modes.
The new optimized MPPT charging technology fastly tracks the solar panels' max power point in any situation and obtains the maximum energy in real-time.
The AC to DC charging process adopts the advanced control algorithm to realize a full digital PFC and dual closed-loop control of voltage and current. As a result, the DC output charging voltage and current are continuously adjustable within a specific range.
The DC to AC inverting process, based on a fully smart digital design, adopts advanced SPWM technology to get a pure sine wave output. The inverting process converts the DC power to AC power, suitable for household appliances, power tools, industrial equipment, audio systems, and other electronics.
The 4.2-inch LCD shows the operational status and full parameters.
To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can increase the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.
Features:
Full intelligent digital energy storage equipment
Supports the battery mode or non-battery mode
Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously
(Optional) Surge and reverse connection protections to support the lithium battery system perfectly
Advanced SPWM technology and pure sine wave output
PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage
Full digital double closed-loop control
High tracking efficiency of MPPT no less than 99.5%
Three charging modes: Solar only, Solar priority, Utility & Solar
Two AC output modes: Utility priority and Inverter priority
Self-learning SOC display function
Multiple LED indicators to dynamic display the status
AC OUT button to control the AC output directly
4.2 inch LCD to monitor and modify system parameters
Remote temperature compensation for batteries
Optional WiFi or GPRS Remote control by the RS485 isolated com. port
Optional BMS-Link port, taking the charging and discharging control from BMS
Customized charging current and discharging limited current
Supports cold start and soft start
Comprehensive electronic protection features
Specifications:
VIDEO DEMO
Description
Epever UPower-Hi Inverter/Charger AC to DC MPPT Hybrid Inverter Charger
DC24V/48V to AC110V/220V,50hz/60hz auto.
5000W,3000W,2000W
Max pv input voltage : 200v~500v.
UPower-Hi, an upgrade hybrid inverter charger, supports utility charging, oil generator charging, solar charging, utility output, inverter output, and energy management. The DSP chip in the product with an advanced control algorithm brings high response speed and high conversion efficiency. In addition, this product adopts an industrial design to ensure high reliability and features multiple charging and output modes.
The new optimized MPPT charging technology fastly tracks the solar panels' max power point in any situation and obtains the maximum energy in real-time.
The AC to DC charging process adopts the advanced control algorithm to realize a full digital PFC and dual closed-loop control of voltage and current. As a result, the DC output charging voltage and current are continuously adjustable within a specific range.
The DC to AC inverting process, based on a fully smart digital design, adopts advanced SPWM technology to get a pure sine wave output. The inverting process converts the DC power to AC power, suitable for household appliances, power tools, industrial equipment, audio systems, and other electronics.
The 4.2-inch LCD shows the operational status and full parameters.
To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can increase the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.
Features:
Full intelligent digital energy storage equipment
Supports the battery mode or non-battery mode
Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously
(Optional) Surge and reverse connection protections to support the lithium battery system perfectly
Advanced SPWM technology and pure sine wave output
PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage
Full digital double closed-loop control
High tracking efficiency of MPPT no less than 99.5%
Three charging modes: Solar only, Solar priority, Utility & Solar
Two AC output modes: Utility priority and Inverter priority
Self-learning SOC display function
Multiple LED indicators to dynamic display the status
AC OUT button to control the AC output directly
4.2 inch LCD to monitor and modify system parameters
Remote temperature compensation for batteries
Optional WiFi or GPRS Remote control by the RS485 isolated com. port
Optional BMS-Link port, taking the charging and discharging control from BMS
Customized charging current and discharging limited current
Supports cold start and soft start
Comprehensive electronic protection features
Specifications:
VIDEO DEMO
Description
1000W Epever MPPT UPower Inverter/Charger , DC12V or 24V to AC220V/230V.
50Hz/60Hz Auto,Pure sine wave.
Product models:
12V : 1000W,max pv input 60V,Max. PV charging current 30A,Max. PV input power 390W.
24V : 1000W,max pv input 100V,Max. PV charging current 30A,Max. PV input power 780W.
UPower SERIES Inverter/Charger
The UPower series is a new type of the inverter/ charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.
Two OUTPUT mode:
Utility; Battery;
Four charging mode:
Solar priority;
Utility priority;
Utility&Solar
Solar;
Features
- Adoption of the advanced SPWM technology, with pure sine wave output
- Fully digitalized voltage and current double closed-loop control
- Advanced MPPT technology, with efficiency no less than 99.5%.
- Four charging mode: Solar priority, Utility priority, Utility & solar and Solar
- LCD design that enables dynamic display of system running data and operating state
- Two OUTPUT mode: Battery and Utility
- Provided with common interface and advanced interface
- Multiple LED indicators that instantly indicate the operating state of the system
- 2P circuit breaker provided at the utility input end
- Independent control of AC output with AC OUT button
- Battery temperature compensation function.
- Extensive Electronic protection
Protection function
- PV Over Current protection
- PV short circuit protection
- PV Reverse Polarity protection
- Night Reverse Charging protection
- Utility input overvoltage protection
- Battery overvoltage protection
- Utility input under voltage protection
- Battery Over Discharge protection
- Load Short Circuit protection
- Load Overload protection
- Device overheating protection
Technical Specifications
VIDEO DEMO
Description
1500W/2000W Epever MPPT UPower Inverter/Charger , DC24V to AC220V/230V.
50Hz/60Hz Auto,Pure sine wave.
Product models:
UP1500-M3222 : 1500W,max pv input 100V,Max. PV charging current 30A,Max. PV input power 780W.
UP2000-M3322 : 2000W,max pv input 100V,Max. PV charging current 30A,Max. PV input power 780W.
UPower SERIES Inverter/Charger
The UPower series is a new type of the inverter/ charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.
Two OUTPUT mode:
Utility; Battery;
Four charging mode:
Solar priority;
Utility priority;
Utility&Solar
Solar;
Features
- Adoption of the advanced SPWM technology, with pure sine wave output
- Fully digitalized voltage and current double closed-loop control
- Advanced MPPT technology, with efficiency no less than 99.5%.
- Four charging mode: Solar priority, Utility priority, Utility & solar and Solar
- LCD design that enables dynamic display of system running data and operating state
- Two OUTPUT mode: Battery and Utility
- Provided with common interface and advanced interface
- Multiple LED indicators that instantly indicate the operating state of the system
- 2P circuit breaker provided at the utility input end
- Independent control of AC output with AC OUT button
- Battery temperature compensation function.
- Extensive Electronic protection
Protection function
- PV Over Current protection
- PV short circuit protection
- PV Reverse Polarity protection
- Night Reverse Charging protection
- Utility input overvoltage protection
- Battery overvoltage protection
- Utility input under voltage protection
- Battery Over Discharge protection
- Load Short Circuit protection
- Load Overload protection
- Device overheating protection
Technical Specifications
VIDEO DEMO
3000W Epever MPPT UPower Inverter/Charger , DC24V or 48V to AC220V/230V.
50Hz/60Hz Auto,Pure sine wave.
Product models:
UP3000-M3322 : 3000W-24V,max pv input 100V,Max. PV charging current 30A,Max. PV input power 780W.
UP3000-M6322 : 3000W-24V,max pv input 150V,Max. PV charging current 60A,Max. PV input power 1500W.
UP3000-M2142 : 3000W-48V,max pv input 150V,Max. PV charging current 20A,Max. PV input power 1040W.
UP3000-M6142 : 3000W-48V,max pv input 150V,Max. PV charging current 60A,Max. PV input power 3000W.
UPower SERIES Inverter/Charger
The UPower series is a new type of the inverter/ charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.
Two OUTPUT mode:
Utility; Battery;
Four charging mode:
Solar priority;
Utility priority;
Utility&Solar
Solar;
Features
- Adoption of the advanced SPWM technology, with pure sine wave output
- Fully digitalized voltage and current double closed-loop control
- Advanced MPPT technology, with efficiency no less than 99.5%.
- Four charging mode: Solar priority, Utility priority, Utility & solar and Solar
- LCD design that enables dynamic display of system running data and operating state
- Two OUTPUT mode: Battery and Utility
- Provided with common interface and advanced interface
- Multiple LED indicators that instantly indicate the operating state of the system
- 2P circuit breaker provided at the utility input end
- Independent control of AC output with AC OUT button
- Battery temperature compensation function.
- Extensive Electronic protection
Protection function
- PV Over Current protection
- PV short circuit protection
- PV Reverse Polarity protection
- Night Reverse Charging protection
- Utility input overvoltage protection
- Battery overvoltage protection
- Utility input under voltage protection
- Battery Over Discharge protection
- Load Short Circuit protection
- Load Overload protection
- Device overheating protection
Technical Specifications
VIDEO DEMO
Description
5000W Epever MPPT UPower Inverter/Charger , DC48V to AC220V/230V.
50Hz/60Hz Auto,Pure sine wave.
Product models:
UP5000-M6342 : 5000W,max pv input 150V,Max. PV charging current 60A,Max. PV input power 3000W.
UP5000-M8342 : 5000W,max pv input 200V,Max. PV charging current 80A,Max. PV input power 4000W.
UP5000-M10342 : 5000W,max pv input 200V,Max. PV charging current 100A,Max. PV input power 5000W.
UPower SERIES Inverter/Charger
The UPower series is a new type of the inverter/ charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.
Two OUTPUT mode:
Utility; Battery;
Four charging mode:
Solar priority;
Utility priority;
Utility&Solar
Solar;
Features
- Adoption of the advanced SPWM technology, with pure sine wave output
- Fully digitalized voltage and current double closed-loop control
- Advanced MPPT technology, with efficiency no less than 99.5%.
- Four charging mode: Solar priority, Utility priority, Utility & solar and Solar
- LCD design that enables dynamic display of system running data and operating state
- Two OUTPUT mode: Battery and Utility
- Provided with common interface and advanced interface
- Multiple LED indicators that instantly indicate the operating state of the system
- 2P circuit breaker provided at the utility input end
- Independent control of AC output with AC OUT button
- Battery temperature compensation function.
- Extensive Electronic protection
Protection function
- PV Over Current protection
- PV short circuit protection
- PV Reverse Polarity protection
- Night Reverse Charging protection
- Utility input overvoltage protection
- Battery overvoltage protection
- Utility input under voltage protection
- Battery Over Discharge protection
- Load Short Circuit protection
- Load Overload protection
- Device overheating protection
Technical Specifications
VIDEO DEMO
-
Serial Device Server :EPEVER TCP 306
EPEVER TCP 306 is a serial device server connecting with EPEVER solar controller, inverter, and inverter/charger via an RS485 port. Communicating by the TCP network, it transfers collected data to the EPEVER cloud server to realize the remote monitoring, parameter setting, and data analysis. With simple and easy operations, the TCP device server's IP address, TCP server, and TCP client can also be modified by the PC software.
Features:
1,Equipped with standard network cable port2,Adjustable 10M/100M Ethernet port
3,Configurable serial port baud rate (600bps~230.4Kbps)
4,Auto obtain the IP Address by the DHCP function
5,High compatibility without any drivers
6,Unlimited communication distance
7,Flexible power supply for the communication interface
8,Designed with low power consumption, and high running speed
