Best selling30 Products
Description
This adapter is used to monitor each controller on the network using
1. Remote Temperature Sensor
Model: RTS300R47K3.81A
Acquisition of battery temperature for undertaking
temperature compensation of control parameters
Length: 3 M
2. USB to RS485 Converter Adapter
Model: CC-USB-RS485-150U
- 【High PV Input Power】This 60 amp MPPT Solar Panel Charger works with 840W Solar Panel on 12V Battery System and 1680W on 24V Battery.
- 【Compatible with a variety of batteries】Negative grounding design, four load control modes, supports lead-acid and lithium batteries.
- 【Powerful electronic protections】Eight electronic protections, including reverse polarity protection(for battery and array), solar short circuit protection, over-temperature protection, load short circuit protection, load over-current protection, heat sink temperature limit protection, over-volt / low-volt protection and battery shedding protection.
- 【OLED screen and MH-M80 Meter】The controller has a 1.3 inches OLED screen and a function button. MH-M80 Meter was attached, which can display system operating information and error indications. In addition to that, 3 status LEDs provide system status at a glance. The meter can easily set the parameters of the controller.
- 【4-stage battery charging】4-stage battery charging algorithm for rapid, efficient, and safe battery charging. The maximal wire size of the controller is 3AWG(25mm2).
Product Description
- Charging status / Load output status / Error LED
- Function button
- Digital OLED display
- Temperature sensor terminals
- Dual RJ45 serial communication ports
- Input and output terminals (PV+/PV-/BAT+/BAT-/LOAD+/LOAD-)
- Dedicated for grounding wire
- Reverse fixing hole
- Mounting holes for positively fixed fittings
- Terminal cover plate
|
|
|
|
|---|---|---|
SolarEpic NS24H60 Solar Charge Controller 60A:Built with advanced power tracking technology to optimize the working of your solar charger system. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charges the battery. It supports lead-acid and lithium batteries. |
MH-M80 Remote Meter:The digital Remote Meter displays system operating information, error indications. Information is displayed on an OLED display. Additionally, 3 status LEDs provide system status at a glance. The Meter can easily set the parameters of the controller. It can be flush mounted in a wall or surface mounted using the mounting frame(included). The MH-M80 is supplied with 3.3 ft (1.0 m) of cable(Can be extended), a mounting frame, and mounting screws. The MH-M80 connects to the RJ-45 port on the MPPT controller. |
Remote Temperature Sensor:It is used to sense the environment's temperature. If the remote temperature sensor is not connected to the controller, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation. Put this sensor near the battery. |
VIDEO DEMO
Feature:
Compatible with PC software & MT50 for real-time monitoring
Connect to PC via USB interfaces with high compatibility
Powered up by controller communication interface
Record capacity: 20000 points(MAX)
LED Indicator design, more intuitive display
technical parameter
|
Model |
eLOG01 |
|
Input voltage |
4～10VDC Powered up by RS485 interface |
|
Average power consumption |
0.3W |
|
Baud rate |
115200 |
|
Communication |
RS485 |
|
Interface type |
2 RJ45 1 Micro USB |
|
Record time |
10 minutes |
|
Dimensions |
71×67.62×25.8mm |
|
Mounting dimension |
57.6mm |
|
Mounting hole size |
Φ4.5 |
|
Working temperature |
-25℃～75℃ |
|
Humidity |
5-95% (N.C.) |
|
Enclosure |
IP30 |
|
Net weight |
42g |
|
Warranty |
2 years |
APK Download：Epever（WIFI&BLE）
Feature：
- Realize wireless monitoring function of solar controller and inverter
- Support mobile phone APP, plug and play, simple and convenient to set
- Use high performance, ultra-low power consumption Bluetooth dedicated chip
- Adopt Bluetooth 4.0 and BLE technology
- Fast communication, strong anti-interference ability
- No need of external power supply
- Communication distance up to 10 m
- Master reset adapter
eBox-WIFI-01
- Realize wireless monitoring function of solar controller and inverter
- Support mobile phone APP, plug and play, simple and convenient to set
- Use high performance CPU with core M4
- Ultra-low power consumption and high speed data processing capability
- No need of external power supply
- Communication distance up to 50 m
- One-key restore the factory settings
Technical Specifications
|
Model→ Item↓ |
eBox-BLE-01 |
eBox-WIFI-01 |
|
Input Voltage |
5VDC (Direct powered by RS485 port ) |
5VDC (Direct powered by RS485 port ) |
|
Standby power Consumption |
0.04W |
0.20W |
|
Operation power consumption |
0.05W |
0.25W |
|
Communication distance |
≤10m |
≤50m |
|
Port baud rate |
300bps~230400bps (Default115200) |
300bps~230400bps (Default 115200) |
|
Communication |
RS485 to BLE |
RS485 to WIFI |
|
Interface type |
RJ45 |
RJ45 |
|
Connecting cable |
Standard network cable (Parallel cable) |
Standard network cable (Parallel cable) |
|
Overall dimension |
51*67*24.5mm |
51*67*24.5mm |
|
Mounting dimension |
41.2mm |
41.2mm |
|
Mounting hole size |
Φ3.2mm |
Φ3.2mm |
|
Working temperatur |
-20~70℃ |
-35~75℃ |
|
Enclosure |
IP30 |
IP30 |
|
Net weight |
37g |
39g |
User's Manual
Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 150V /200V
Tracer-AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer-AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.
Features:
- High quality and low failure rate components of ST and IR ensure the product’s service life
- 100% charging and discharging in working environment temperature range
- Maximum DC/DC transfer efficiency as high as 98.7%
- Advanced MPPT technology & ultra-fast tracking speed guarantee tracking up to 99.5%
- Advanced MPPT control algorithm minimize the MPP loss rate and loss time
- Accurate recognition and tracking of multiple-peaks maximum power point
- Wide MPP operating voltage range
- Limit the charging power and current over rated value
- Support 4 charging options: Sealed, Gel, Flooded and User.
- Battery temperature compensation function
- Real-time energy statistics function
- Automatic over-temperature power reduction function
- Load relay control to realize diversified load work modes
- Auto-control of utility and generator relay design
- Remote temperature sensor and remote voltage sensor design, collect more accurate data of battery temperature and voltage value
- Isolated RS-485 with 5VDC/200Ma protected output for no power devices, with MODBUS protocol
- Monitor and set the parameters via mobile phone APP or PC software
Parameters
SolarEpic MT50 LCD Remote Meter Suitable For Tracer-AN/Tracer-BN Charge Controller Epever
Note : This kind of meter just can be use for epever controller,can't be use for
renogy or hqst controller.
Features:
data of controllers;
■ Real-time display the operational data and working status of the connection devices in digital, graphic and textual forms by a large-screen multifunction LCD;
■ Direct, convenient and rapid operation of six navigation function keys;
■ Both data and power flowing on the same lead, no need for external power;
■ Real-time data monitoring and remote load switchover of the controllers, and data browse and modification of device parameters, charge control parameters and load control parameters;
■ Real-time display and acoustic alarm of failure information of the connection devices;
■ Longer communication distance based on RS485.
Electrical Parameters
|
Faceplate dimensions |
98×98 mm |
|
Frame dimensions |
114×114 mm |
|
Connector type |
RJ45 |
|
Meter cable |
Standard 2m,Max 50 m |
|
Meter weight |
Simple package: 0.23 Kg Standard package:0.32 Kg |
|
Ambient temperature |
-20℃~+70℃ |
