Best selling

Note : This inverter do not have the monitoring function.

1200W waterproof grid tie inverter,pure sine wave inverter.

DC22V-50V to AC110V or 220V, 50Hz/60Hz auto.

Waterproof IP65.

Color : silver,golden,blue.

LCD display,remote meter

Automatic identify the inverter, and display relevant parameter data and system working status

Screen data : ac voltage,current and frequency,generating capacity,power factor

AC cord : EU,UK,US,AU plug,will send the plug as the country need.

System Function

◆ 6-grade power search---In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic open 6-grade power search function,and keep outputing efficent and steady during the low power .

◆ Wide voltage input(22-50VDC)---

1. DC voltage input:22~50VDC; 2. Second level power variable voltage conversion.

◆ High-frequency two-way and one-way grid function---

1. High frequency direct modulation, AC half wave synthesis;
2. Two-way grid means: Load consume directly. And can reverse AC current transmission.

◆ Kinds of frequency output function---

1. It can apply to 50Hz and 60Hz frequency of AC; 2. Frequency range: 45Hz ~ 64Hz;

◆Directly connected to the solar panels (do not need to connect the battery)

◆ AC 0 angle with high precision auto-detection---

High-precision analysing the AC phase angle .The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.1. AC phase shift: < 1%; 2. Over-zero protection: 0.2 VAC; 3. AC switching: 50Hz / 60Hz.

◆ Synchronous High-frequency Modulation

1. Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz) ;
2. Synthetic way: MOSFET full-bridge; 3. High frequency: 50KHz.

◆ Pure Sine Wave Output---Use SPWM directly to make pure sine wave output.

1. Output waveform: Adopt complementary PWM to push-pull pure sine wave;
2. Generate means: enhancement-mode SPWM.

◆ Power Automatically Locked (APL)---

automatically powers locked in maximum power point, made output more stable.

◆ Constant Current, Constant Power---

constant current and output power, without any overload, over-current phenomenon.

◆ Exactly and timely automatic Island Effect Protection

◆ High-Frequency High Conversion Rate---

Adapt high frequency converter, the output more efficient.

◆ Maximum Power Point Tracking (MPPT)---

high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point,made the inverter discharge to power grid with the highest efficiency.

◆ Stack using--- Such as: 4 micro inverter of 260W stacking can achieve 1040W. the number of the stacking is unlimited.

◆ DC input---Input voltage range: 22V to 50V,PV Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels.Suggestion making the PV in parallel.

◆ AC output---220VAC: 180V - 262V, 50HZ; 110V AC: 80V - 160V,60HZ.

Notes:

★Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons.

★Non-professionals do not disassemble.Only qualified personnel may repair this product.

★Please install inverter in the low humidity and well ventilated place to avoid the inverter over-heating,and clear around the inflammable and explosive materials.

★When using this product, avoid children touching,playing, to avoid electric shock.

★Connected solar panels, battery or wind generators DC input DC power supply cable.

LED Display:

1.Red light 3 second---Red LED light 3 second while device starts , then in working condition;

2.Green flash fast---MPPT searching;

3.Green flash slow---MPPT + searching;

4. Red flash slow---MPPT - searching;

5.Green lights on 3s and off 0.5s---MPPT locked;

6.Red light steady---

1. Islanding protection;

b.Over-temperature protection;

c.Over / low AC voltage protection;

1. Over / low DC voltage protection; e.Fault

Remarks :

LED flashing in the process of being working condition : inverters connected to AC & DC sides→Red LED light 3 second→Green LED flash fast(MPPT searching)→Green LED flash slow(MPPT + searching) / Red LED flash slow (MPPT - searching) / reen LED lights on 3s and off 0.5s (MPPT locked) .

Package:

1.One user manual;

2.One 1200W inverter;

3.One AC Cable;

4.One LCD display meter with AC plug.

LCD display,remote meter

Optional remote meter to our gird tie inverter

Automatic identify the inverter, and display relevant parameter data and system working status

Screen data : ac voltage,current and frequency,generating capacity,power factor

Have EU,AU,US,UK plug,choose the one as you want,thanks.

User's Manual

Send from USA,2-8 working days delivery with tracking.Note : This kind of adapter just can be use for epever tracer an (50a-100a )controller.

PT-ADP-PORT——PT Adapter

PT Adapter is an accessory which can adjust the charging power of multiple controllers in parallel. This module ensures the charging current of each controller unit keep in close to the average of the total charging current, the adapter can monitor the charging status and adjusting the charging current of each controller in real time, can adjust charging running status according to charging full status of the battery, improving the service life of the equipment. At the same time, it can connect the PC software to monitor and set the operating parameters of each controller, which plays an important role in the parallel application of the controller.

Features：

1, Master and slave controller can be intelligently identified to realize equal-flow charging(one master controller in the system, and the rest are slave controllers)

2, Monitoring the online status of controller in real-time and switching the quantity of charging controller, improving the service life of the product.

3, Support up to 6 controllers in parallel

4, The communication port support the standard Modbus communication protocol, it can connect various modules or PC software to realize remote monitoring.

5, Easy one button press to set the communication baud rate.

6, LED indicator indicate the running status

   VIDEO DEMO

DC10.8V~30V or  DC20V~45V to AC110V or 220V Output.

1000W Grid Tie Inverter,Pure sine wave inverter.

With MPPT functions.50HZ/60HZ auto.

Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system.

The output need to be connected to the grid power. Can not supply power directly to the AC loads.

Introduction

Grid tie inverter is a device which directly converts direct current into alternating current which

sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key

Smart Microinverter can eliminate the risk of high DC voltage. Distributed modularization design

philosophy for Smart Microinverterl insures the productiveness of the whole system and will not

affect by a single point of failure. Each Smart Microinverter is individually connected to one PV

module in the array. Each PV module has the individual Maximum Peak Power Point Tracker

(MPPT) control and insures the maximum power is exported to the utility grid regardless of the

performance of the other PV modules in the array. When PV modules in the array under non-ideal

conditions in practical applications such as PV modules are affected by shading, soiling,

orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy

production from the whole PV system and gets return on investment in less time.

Advantages of Smart Microinverter

1. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance.

2. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable.

3. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system.

4. Adopting high-frequency isolation transformer type, high efficiency, and high security.
5. Perfect electrical protection function.
6. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion.
7. Getting electronic circuit design, appearance design and other core technology patents.

10.8-30V Version

20-45V Version

Warranty

1 Years Warranty

What's In Box

• 1 x 1000W Grid Tie Inverter
• 1 x User's Manaul
• 1 x AC Cord (US/AU/EU/UK)

Send from USA,1-8 days delivery with tracking.

Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system.

The output need to be connected to the grid power. Can not supply power directly to the AC loads.

10.8-30V Version

20-45V Version

Warranty:

1 Years Warranty

Package :

• 1 x 1000W Grid Tie Inverter
• 1 x User's Manaul
• 1 x AC Cord (US)