Best selling19 Products
User's Manual
Product Description
SolarEpic Tracer4215BN 40amp Solar Charge Controller Feature:
- Negative Grounding, 150V /138V PV Input
- Metal Case allows for natural heat dissipation
- Support 4 charging options: Sealed, Gel, Flooded and User
- 4 Stage Charging
- Serial connection (string) of PV modules allows minimize the charging current as a way of saving the energy
- Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
- Ultra-fast tracking speed and tracking efficiency
- Features Standard Modbus Interface with RS485 Port
MPPT Solar Charge Controller 40A Tracer4215BN Schematic Diagram
VIDEO DEMO
Latest product information（For more product video please click here）
User's Manual
Product Description
EPEVER Tracer AN series mppt solar charge controller (100A)
Based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.
MSRT can give a very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system;
Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel.
The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.
VIDEO DEMO
Latest product information（For more product video please click here）
User's Manual
Product Description
Something you should know for Lithium Batteries Charging
- When a lithium-ion battery is used, the system voltage cannot be identified automatically, please confirm the battery system voltage before installation.
- When you choose lithium battery as a battery type, the temperature compensate coefficient would be 0, and cannot be changed.
- This MPPT solar charge controller can work under full load in the ambient temperature range. when the internal temperature reach 81℃, the power reduction mode will be turned on.
- Lithium battery type can ONLY be set on a cellphone app or "solar station monitor" PC software.
Schematic Diagram
Warm tips：
Step: Connect the system in the order of 1.battery-->2. load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.
- NEVER connect the soalr panel array to the controller Without/Before a Battery.
- Battery must be connected FIRST !!!
- DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
- If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
- The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance.
How to program for Lithium Battery？
1. Via PC (Accessories needed：RS485),
2. Via phone APP (Accessories needed：Ebox-Wifi or Ebox-Blue)
Software download website: EPever official website or look for in the manual
VIDEO DEMO
Latest product information（For more product video please click here）
Description
This adapter is used to monitor each controller on the network using
1. Remote Temperature Sensor
Model: RTS300R47K3.81A
Acquisition of battery temperature for undertaking
temperature compensation of control parameters
Length: 3 M
2. USB to RS485 Converter Adapter
Model: CC-USB-RS485-150U
- 【High PV Input Power】This 60 amp MPPT Solar Panel Charger works with 840W Solar Panel on 12V Battery System and 1680W on 24V Battery.
- 【Compatible with a variety of batteries】Negative grounding design, four load control modes, supports lead-acid and lithium batteries.
- 【Powerful electronic protections】Eight electronic protections, including reverse polarity protection(for battery and array), solar short circuit protection, over-temperature protection, load short circuit protection, load over-current protection, heat sink temperature limit protection, over-volt / low-volt protection and battery shedding protection.
- 【OLED screen and MH-M80 Meter】The controller has a 1.3 inches OLED screen and a function button. MH-M80 Meter was attached, which can display system operating information and error indications. In addition to that, 3 status LEDs provide system status at a glance. The meter can easily set the parameters of the controller.
- 【4-stage battery charging】4-stage battery charging algorithm for rapid, efficient, and safe battery charging. The maximal wire size of the controller is 3AWG(25mm2).
Product Description
- Charging status / Load output status / Error LED
- Function button
- Digital OLED display
- Temperature sensor terminals
- Dual RJ45 serial communication ports
- Input and output terminals (PV+/PV-/BAT+/BAT-/LOAD+/LOAD-)
- Dedicated for grounding wire
- Reverse fixing hole
- Mounting holes for positively fixed fittings
- Terminal cover plate
|
|
|
|
|---|---|---|
SolarEpic NS24H60 Solar Charge Controller 60A:Built with advanced power tracking technology to optimize the working of your solar charger system. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charges the battery. It supports lead-acid and lithium batteries. |
MH-M80 Remote Meter:The digital Remote Meter displays system operating information, error indications. Information is displayed on an OLED display. Additionally, 3 status LEDs provide system status at a glance. The Meter can easily set the parameters of the controller. It can be flush mounted in a wall or surface mounted using the mounting frame(included). The MH-M80 is supplied with 3.3 ft (1.0 m) of cable(Can be extended), a mounting frame, and mounting screws. The MH-M80 connects to the RJ-45 port on the MPPT controller. |
Remote Temperature Sensor:It is used to sense the environment's temperature. If the remote temperature sensor is not connected to the controller, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation. Put this sensor near the battery. |
Feature:
Compatible with PC software & MT50 for real-time monitoring
Connect to PC via USB interfaces with high compatibility
Powered up by controller communication interface
Record capacity: 20000 points(MAX)
LED Indicator design, more intuitive display
technical parameter
|
Model |
eLOG01 |
|
Input voltage |
4～10VDC Powered up by RS485 interface |
|
Average power consumption |
0.3W |
|
Baud rate |
115200 |
|
Communication |
RS485 |
|
Interface type |
2 RJ45 1 Micro USB |
|
Record time |
10 minutes |
|
Dimensions |
71×67.62×25.8mm |
|
Mounting dimension |
57.6mm |
|
Mounting hole size |
Φ4.5 |
|
Working temperature |
-25℃～75℃ |
|
Humidity |
5-95% (N.C.) |
|
Enclosure |
IP30 |
|
Net weight |
42g |
|
Warranty |
2 years |
APK Download：Epever（WIFI&BLE）
Feature：
- Realize wireless monitoring function of solar controller and inverter
- Support mobile phone APP, plug and play, simple and convenient to set
- Use high performance, ultra-low power consumption Bluetooth dedicated chip
- Adopt Bluetooth 4.0 and BLE technology
- Fast communication, strong anti-interference ability
- No need of external power supply
- Communication distance up to 10 m
- Master reset adapter
eBox-WIFI-01
- Realize wireless monitoring function of solar controller and inverter
- Support mobile phone APP, plug and play, simple and convenient to set
- Use high performance CPU with core M4
- Ultra-low power consumption and high speed data processing capability
- No need of external power supply
- Communication distance up to 50 m
- One-key restore the factory settings
Technical Specifications
|
Model→ Item↓ |
eBox-BLE-01 |
eBox-WIFI-01 |
|
Input Voltage |
5VDC (Direct powered by RS485 port ) |
5VDC (Direct powered by RS485 port ) |
|
Standby power Consumption |
0.04W |
0.20W |
|
Operation power consumption |
0.05W |
0.25W |
|
Communication distance |
≤10m |
≤50m |
|
Port baud rate |
300bps~230400bps (Default115200) |
300bps~230400bps (Default 115200) |
|
Communication |
RS485 to BLE |
RS485 to WIFI |
|
Interface type |
RJ45 |
RJ45 |
|
Connecting cable |
Standard network cable (Parallel cable) |
Standard network cable (Parallel cable) |
|
Overall dimension |
51*67*24.5mm |
51*67*24.5mm |
|
Mounting dimension |
41.2mm |
41.2mm |
|
Mounting hole size |
Φ3.2mm |
Φ3.2mm |
|
Working temperatur |
-20~70℃ |
-35~75℃ |
|
Enclosure |
IP30 |
IP30 |
|
Net weight |
37g |
39g |
