SolarEpic
2000W Epever UPower-Hi Inverter/Charger AC to DC MPPT Hybrid Inverter Charger 24V 48V
$734.41
$746.00
Pickup currently unavailable
Epever UPower-Hi Inverter/Charger AC to DC MPPT Hybrid Inverter Charger
DC24V/48V to AC110V/220V,50hz/60hz auto.
5000W,3000W,2000W
Max pv input voltage : 200v~500v.
UPower-Hi, an upgrade hybrid inverter charger, supports utility charging, oil generator charging, solar charging, utility output, inverter output, and energy management. The DSP chip in the product with an advanced control algorithm brings high response speed and high conversion efficiency. In addition, this product adopts an industrial design to ensure high reliability and features multiple charging and output modes.
The new optimized MPPT charging technology fastly tracks the solar panels' max power point in any situation and obtains the maximum energy in real-time.
The AC to DC charging process adopts the advanced control algorithm to realize a full digital PFC and dual closed-loop control of voltage and current. As a result, the DC output charging voltage and current are continuously adjustable within a specific range.
The DC to AC inverting process, based on a fully smart digital design, adopts advanced SPWM technology to get a pure sine wave output. The inverting process converts the DC power to AC power, suitable for household appliances, power tools, industrial equipment, audio systems, and other electronics.
The 4.2-inch LCD shows the operational status and full parameters.
To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can increase the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.
Features:
Full intelligent digital energy storage equipment
Supports the battery mode or non-battery mode
Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously
(Optional) Surge and reverse connection protections to support the lithium battery system perfectly
Advanced SPWM technology and pure sine wave output
PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage
Full digital double closed-loop control
High tracking efficiency of MPPT no less than 99.5%
Three charging modes: Solar only, Solar priority, Utility & Solar
Two AC output modes: Utility priority and Inverter priority
Self-learning SOC display function
Multiple LED indicators to dynamic display the status
AC OUT button to control the AC output directly
4.2 inch LCD to monitor and modify system parameters
Remote temperature compensation for batteries
Optional WiFi or GPRS Remote control by the RS485 isolated com. port
Optional BMS-Link port, taking the charging and discharging control from BMS
Customized charging current and discharging limited current
Supports cold start and soft start
Comprehensive electronic protection features
Specifications:
|
Item |
UP2000-HM6021 |
UP3000-HM10021 |
UP3000-HM5041 |
UP3000-HM8041 |
|
Rated battery voltage |
24VDC |
48VDC |
||
|
Battery input voltage |
21.6~32VDC |
43.2~64VDC |
||
|
Max. battery charging current |
60A |
100A |
50A |
80A |
|
Inverter output |
||||
|
Continuous output power |
2000W |
3000W |
3000W |
3000W |
|
Max. surge power(3S) |
4000W |
6000W |
6000W |
6000W |
|
Output voltage range |
110VAC(-3%~+3%), 120VAC(-10%~+3%) |
|||
|
Output frequency |
50/60±0.2% |
|||
|
Output wave |
Pure Sine Wave |
|||
|
Load power factor |
0.2-1(Load power ≤ Continuous output power) |
|||
|
Distortion THD |
THD≤5%(Resistive load) |
|||
|
80% rated output efficiency |
89% |
90% |
91% |
91% |
|
Max. Rated output efficiency |
88% |
88% |
90% |
90% |
|
Max. output efficiency |
90% |
92% |
92% |
92% |
|
Switch time |
10ms(Switch from the utility output to the inverter output), 15ms(Switch from the inverter output to the utility output) |
|||
|
Utility charging |
||||
|
Utility input voltage |
88VAC~132VAC (Default), 80VAC~140VAC(Programmable) |
|||
|
Utility input frequency |
40~65Hz |
|||
|
Max. utility charge current |
60A |
80A |
40A |
40A |
|
Solar charging |
||||
|
Max. PV open circuit voltage |
250V, 220V |
|||
|
MPPT voltage range |
60~200V |
|||
|
Max. PV input power |
2000W |
3000W |
3000W |
4000W |
|
(Note: For the curve of Max. PV input power Vs. PV open-circuit voltage, see chapter Appendix1 for details.) |
||||
|
Max. PV charging power |
1725W |
2875W |
2875W |
4000W |
|
Max. PV charging current |
60A |
100A |
50A |
80A |
|
Equalize charging voltage |
29.2V(AGM default) |
58.4V(AGM default) |
||
|
Boost charging voltage |
28.8V(AGM default) |
57.6V(AGM default) |
||
|
Float charging voltage |
27.6V(AGM default) |
55.2V(AGM default) |
||
|
Low voltage disconnect voltage |
21.6V(AGM default) |
43.2V(AGM default) |
||
|
Tracking efficiency |
≥99.5% |
|||
|
Temp. compensate coefficient |
-3mV/℃/2V(Default) |
|||
|
General |
||||
|
Surge current« |
50A |
60A |
56A |
95A |
|
Zero load consumption |
<1.6A |
<1.6A |
<1.2A |
<0.8A |
|
(without PV and utility connection, turn on the load output) |
||||
|
Standby current |
<1.2A |
<1.0A |
<0.7A |
<0.6A |
|
(without PV and utility connection, turn off the load output) |
||||
|
Mechanical Parameters |
||||
|
Dimension(H x W x D) |
607.5x381.6x127mm |
642.5x381.6x149mm |
642.5x381.6x149mm |
642.5x381.6x149mm |
|
Mounting size |
585*300mm |
620*300mm |
620*300mm |
620*300mm |
|
Mounting hole size |
Φ10mm |
Φ10mm |
Φ10mm |
Φ10mm |
|
Net Weight |
15kg |
19kg |
19kg |
19kg |
|
Item |
UP2000-HM6022 |
UP3000-HM10022 |
UP3000-HM5042 |
UP5000-HM8042 |
|
Rated battery voltage |
24VDC |
48VDC |
||
|
Battery input voltage |
21.6~32VDC |
43.2~64VDC |
||
|
Max. battery charging current |
60A |
100A |
50A |
80A |
|
Inverter output |
||||
|
Continuous output power |
2000W |
3000W |
3000W |
5000W |
|
Max. surge power(3S) |
4000W |
6000W |
6000W |
8000W |
|
Output voltage range |
220VAC(-6%~+3%), 230VAC(-10%~+3%) |
|||
|
Output frequency |
50/60±0.2% |
|||
|
Output wave |
Pure Sine Wave |
|||
|
Load power factor |
0.2-1(Load power ≤ Continuous output power) |
|||
|
Distortion THD |
THD≤3%(Resistive load) |
|||
|
80% rated output efficiency |
92% |
92% |
92% |
92% |
|
Max. Rated output efficiency |
91% |
91% |
90% |
91% |
|
Max. output efficiency |
93% |
93% |
93% |
93% |
|
Switch time |
10ms(Switch from the utility output to the inverter output), 15ms(Switch from the inverter output to the utility output) |
|||
|
Utility charging |
||||
|
Utility input voltage |
176VAC~264VAC (Default), 90VAC~280VAC(Programmable) |
|||
|
Utility input frequency |
40~65Hz |
|||
|
Max. utility charge current |
60A(When the Utility input voltage is 90VAC~180VAC, the Max. utility charge current is 30A） |
80A(When the Utility input voltage is 90VAC~180VAC, the Max. utility charge current is 40A） |
40A(When the Utility input voltage is 90VAC~180VAC, the Max. utility charge current is 20A） |
60A(When the Utility input voltage is 90VAC~180VAC, the Max. utility charge current is 30A） |
|
Solar charging |
||||
|
Max. PV open circuit voltage |
450V, 395V |
500V 440V |
||
|
MPPT voltage range |
80~350V |
120~400V |
||
|
Max. PV input power |
2500W |
4000W |
4000W |
4000W |
|
(Note: For the curve of Max. PV input power Vs. PV open-circuit voltage, see chapter Appendix 1 for details.) |
||||
|
Max. PV charging power |
1725W |
2875W |
2875W |
4000W |
|
Max. PV charging current |
60A |
100A |
50A |
80A |
|
Equalize charging voltage |
29.2V(AGM default) |
58.4V(AGM default) |
||
|
Boost charging voltage |
28.8V(AGM default) |
57.6V(AGM default) |
||
|
Float charging voltage |
27.6V(AGM default) |
55.2V(AGM default) |
||
|
Low voltage disconnect voltage |
21.6V(AGM default) |
43.2V(AGM default) |
||
|
Tracking efficiency |
≥99.5% |
|||
|
Temp. compensate coefficient |
-3mV/℃/2V(Default) |
|||
|
General |
||||
|
Surge current« |
50A |
60A |
56A |
95A |
|
Zero load consumption |
<1.8A |
<1.2A |
||
|
(without PV and utility connection, turn on the load output) |
||||
|
Standby current |
<1.2A |
<0.7A |
||
|
(without PV and utility connection, turn off the load output) |
||||
|
Mechanical Parameters |
||||
|
Dimension(H x W x D) |
607.5x381.6x127mm |
642.5x381.6x149mm |
607.5x381.6x149mm |
642.5x381.6x149mm |
|
Mounting size |
585*300mm |
620*300mm |
585*300mm |
620*300mm |
|
Mounting hole size |
Φ10mm |
Φ10mm |
Φ10mm |
Φ10mm |
|
Net Weight |
15kg |
19kg |
18kg |
19kg |