USA Warehouse

Cable Connector Male+Female Wire Solar Panel Cable Connector

Send from USA,2-8 days delivery with tracking.

Specification:

Rate voltage :1000V
Rated current :30A(4mm2,6mm2)
Test voltage :6KV(50Hz)
Protect degree: IP67
Insulation material :PPO
Contact material Copper :sliver plated
Operating temperature :-40°C~+90°C
Safe class :2
Flame class: UL94-V0
Contact resistance of plug connectors: ≤5mΩ
Insertion force :≤50N
Withdraw force: ≥50N
Suitable cable :2.5mm2/4mm2/6mm2(AWG14/12/10)
Locking system Snap in
Drawing 

Package include:

male solar panel cable connector

female solar panel cable connector

User's Manual

Send from USA,2-8 working days delivery with tracking.Note : This kind of adapter just can be use for epever tracer an (50a-100a )controller.

PT-ADP-PORT——PT Adapter

PT Adapter is an accessory which can adjust the charging power of multiple controllers in parallel. This module ensures the charging current of each controller unit keep in close to the average of the total charging current, the adapter can monitor the charging status and adjusting the charging current of each controller in real time, can adjust charging running status according to charging full status of the battery, improving the service life of the equipment. At the same time, it can connect the PC software to monitor and set the operating parameters of each controller, which plays an important role in the parallel application of the controller.

Features：

1, Master and slave controller can be intelligently identified to realize equal-flow charging(one master controller in the system, and the rest are slave controllers)

2, Monitoring the online status of controller in real-time and switching the quantity of charging controller, improving the service life of the product.

3, Support up to 6 controllers in parallel

4, The communication port support the standard Modbus communication protocol, it can connect various modules or PC software to realize remote monitoring.

5, Easy one button press to set the communication baud rate.

6, LED indicator indicate the running status

   VIDEO DEMO

Description

User's Manual

Lithium Battery MPPT Solar Charge Controller.

Epever 10A/15A/20A/30A-12V/24VDC Auto.

Max pv input voltage :60V(10A/15A/20A) or 100V(30A).

Waterproof class  : IP65

The Tracer BP series solar charge controller adopt to the advanced Maximum Power Point Tracking charging methods, it enables the system charging and discharging management to obtain the most radical optimization. Increase the system flexibility,yet lower down the system cost. The controller support a variety of battery, for example sealed, gel, flooded and lithium battery. User can view and modify the working status and parameters. It can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

Models：

10A : Tracer2606BP 130W/12V 260W/24VDC ,max pv 60V.

15A : Tracer3906BP 195W/12V 390W/24VDC ,max pv 60V.

20A : Tracer5206BP 260W/12V 520W/24VDC ,max pv 60V.

30A : Tracer7810BP 390W/12V 780W/24VDC ,max pv 100V.

Features：

• Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
• Wide working environment temperature(-40℃～60℃)
• Apply to lithium battery(LiFePO4/Li-NiCoMn)and battery(Sealed/Gel/Flooded)
• Lithium battery self-activating and low temperature protection function
• Maximum conversion efficiency of 98%
• Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99%
• Ultra-fast tracking speed and guaranteed tracking efficiency
• Accurately recognizing and tracking of multiple power points
• PV power limitation function
• Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485 communication interface.
• Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better
• Connecting the IOT(Internet of Things) module and Cloud Server monitoring software to realize remote monitoring of the multi-machine system
• The RS485 connector can provide power supply
• Aluminum housing for better cooling
• Real-time energy statistics function
• IP67 waterproof degree
• Long lifespan design，five years warranty

Load working mode:

• Manual Mode
• Light ON/OFF(Default)
• Light ON + Timer
• Real-time Control
• Intelligent Power Mode

Electronic protections:

• PV over current protection
• PV short circuit protection
• PV reverse polarity protection
• Battery reverse polarity protection
• Battery over voltage protection
• Battery over discharge protection
• Battery overheating protection
• Lithium battery low temperature protection
• Load overload protection
• Load Short circuit protection

Technical specifications 

※ Lithium battery do not automatic identification system voltage and no temperature compensation coefficient.

* Programmable voltage value by SPP-02 , RC-02 and APP.

    VIDEO DEMO

Item specifics

Note : This inverter do not have the monitoring function.

600W waterproof grid tie inverter,pure sine wave inverter.

DC20V-50V to AC110V or 220V,50Hz/60Hz auto.

Waterproof IP65.

System Function

◆ Wireless communication 433/462MHz

◆ 6-grade power search---In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic open 6-grade power search function,and keep outputing efficent and steady during the low power .

◆ Wide voltage input(22-50VDC)---

1. DC voltage input:22~50VDC; 2. Second level power variable voltage conversion.

◆ High-frequency two-way and one-way grid function---

1. High frequency direct modulation, AC half wave synthesis;
2. Two-way grid means: Load consume directly. And can reverse AC current transmission.

◆ Kinds of frequency output function---

1. It can apply to 50Hz and 60Hz frequency of AC; 2. Frequency range: 45Hz ~ 64Hz;

◆Directly connected to the solar panels (do not need to connect the battery)

◆ AC 0 angle with high precision auto-detection---

High-precision analysing the AC phase angle .The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.1. AC phase shift: < 1%; 2. Over-zero protection: 0.2 VAC; 3. AC switching: 50Hz / 60Hz.

◆ Synchronous High-frequency Modulation

1. Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz) ;
2. Synthetic way: MOSFET full-bridge; 3. High frequency: 50KHz.

◆ Pure Sine Wave Output---Use SPWM directly to make pure sine wave output.

1. Output waveform: Adopt complementary PWM to push-pull pure sine wave;
2. Generate means: enhancement-mode SPWM.

◆ Power Automatically Locked (APL)---

automatically powers locked in maximum power point, made output more stable.

◆ Constant Current, Constant Power---

constant current and output power, without any overload, over-current phenomenon.

◆ Exactly and timely automatic Island Effect Protection

◆ High-Frequency High Conversion Rate---

Adapt high frequency converter, the output more efficient.

◆ Maximum Power Point Tracking (MPPT)---

high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point,made the inverter discharge to power grid with the highest efficiency.

◆ Stack using--- Such as: 4 micro inverter of 260W stacking can achieve 1040W. the number of the stacking is unlimited.

◆ DC input---Input voltage range: 22V to 50V,PV Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels.Suggestion making the PV in parallel.

◆ AC output---220VAC: 180V - 262V, 50HZ; 110V AC: 80V - 160V,60HZ.

Notes:

★Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons.

★Non-professionals do not disassemble.Only qualified personnel may repair this product.

★Please install inverter in the low humidity and well ventilated place to avoid the inverter over-heating,and clear around the inflammable and explosive materials.

★When using this product, avoid children touching,playing, to avoid electric shock.

★Connected solar panels, battery or wind generators DC input DC power supply cable.

LED Display:

1.Red light 3 second---Red LED light 3 second while device starts , then in working condition;

2.Green flash fast---MPPT searching;

3.Green flash slow---MPPT + searching;

4. Red flash slow---MPPT - searching;

5.Green lights on 3s and off 0.5s---MPPT locked;

6.Red light steady---

1. Islanding protection;

b.Over-temperature protection;

c.Over / low AC voltage protection;

1. Over / low DC voltage protection; e.Fault

Remarks

LED flashing in the process of being working condition : inverters connected to AC & DC sides→Red LED light 3 second→Green LED flash fast(MPPT searching)→Green LED flash slow(MPPT + searching) / Red LED flash slow (MPPT - searching) / reen LED lights on 3s and off 0.5s (MPPT locked) .

What's In Box

1.One user manual;

2.One 600W inverter;

3.One AC Cable;

Item specifics

Note : This inverter do not have the monitoring function.

300W waterproof grid tie inverter,pure sine wave inverter.

DC22V-50V to AC110V or 220V, 50Hz/60Hz auto.

Waterproof IP65.

Use for 24v/36v solar panel,do not suggest to use for battery or wind power.

System Function

◆ 6-grade power search---In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic open 6-grade power search function,and keep outputing efficent and steady during the low power .

◆ Wide voltage input(22-50VDC)---

1. DC voltage input:22~50VDC; 2. Second level power variable voltage conversion.

◆ High-frequency two-way and one-way grid function---

1. High frequency direct modulation, AC half wave synthesis;
2. Two-way grid means: Load consume directly. And can reverse AC current transmission.

◆ Kinds of frequency output function---

1. It can apply to 50Hz and 60Hz frequency of AC; 2. Frequency range: 45Hz ~ 64Hz;

◆Directly connected to the solar panels (do not need to connect the battery)

◆ AC 0 angle with high precision auto-detection---

High-precision analysing the AC phase angle .The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.1. AC phase shift: < 1%; 2. Over-zero protection: 0.2 VAC; 3. AC switching: 50Hz / 60Hz.

◆ Synchronous High-frequency Modulation

1. Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz) ;
2. Synthetic way: MOSFET full-bridge; 3. High frequency: 50KHz.

◆ Pure Sine Wave Output---Use SPWM directly to make pure sine wave output.

1. Output waveform: Adopt complementary PWM to push-pull pure sine wave;
2. Generate means: enhancement-mode SPWM.

◆ Power Automatically Locked (APL)---

automatically powers locked in maximum power point, made output more stable.

◆ Constant Current, Constant Power---

constant current and output power, without any overload, over-current phenomenon.

◆ Exactly and timely automatic Island Effect Protection

◆ High-Frequency High Conversion Rate---

Adapt high frequency converter, the output more efficient.

◆ Maximum Power Point Tracking (MPPT)---

high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point,made the inverter discharge to power grid with the highest efficiency.

◆ Stack using--- Such as: 4 micro inverter of 260W stacking can achieve 1040W. the number of the stacking is unlimited.

◆ DC input---Input voltage range: 22V to 50V,PV Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels.Suggestion making the PV in parallel.

◆ AC output---220VAC: 180V - 262V, 50HZ; 110V AC: 80V - 160V,60HZ.

Notes:

★Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons.

★Non-professionals do not disassemble.Only qualified personnel may repair this product.

★Please install inverter in the low humidity and well ventilated place to avoid the inverter over-heating,and clear around the inflammable and explosive materials.

★When using this product, avoid children touching,playing, to avoid electric shock.

★Connected solar panels, battery or wind generators DC input DC power supply cable.

LED Display:

1.Red light 3 second---Red LED light 3 second while device starts , then in working condition;

2.Green flash fast---MPPT searching;

3.Green flash slow---MPPT + searching;

4. Red flash slow---MPPT - searching;

5.Green lights on 3s and off 0.5s---MPPT locked;

6.Red light steady---

1. Islanding protection;

b.Over-temperature protection;

c.Over / low AC voltage protection;

1. Over / low DC voltage protection; e.Fault

Remarks 

LED flashing in the process of being working condition : inverters connected to AC & DC sides→Red LED light 3 second→Green LED flash fast(MPPT searching)→Green LED flash slow(MPPT + searching) / Red LED flash slow (MPPT - searching) / reen LED lights on 3s and off 0.5s (MPPT locked) .

Package

1.One user manual;

2.One 300W inverter;

3.One AC Cable;

Send from USA,2-8 working days delivery with tracking.

1300W grid tie inverter,DC18V or 24V to AC110V or 220V pure sine wave inverter.

MPPT solar inverter,50/60hz auto,CE.

Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system.

The output need to be connected to the grid power. Can not supply power directly to the AC loads.

Warranty

1 Years Warranty

What's In Box

• 1 x 1300W Grid Tie Inverter
• 1 x User's Manaul
• 1 x AC Cord (US)

User's Manual

Description

Based on common negative design and advanced MPPT control algorithm

MPPT Charge efficiency > 99%

Technical Data: Nominal system voltage:12/24VDC auto work

Rated charge current :20A

Rated discharge current: 20A

Battery input voltage range: 8-32V

Max. PV open circuit voltage:60V(at minimum operating environment temperature) 46V(at 25℃ environment temperature)

MPP voltage range:V(BAT)+2V～72V

Max. PV input power:260W(12V Battery) & 520W(24V battery)

Power terminals:#12 AWG(4mm2)

MT50 Remote Meter

This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

Technical Data Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

 

SolarEpic 2206AN Solar Charge Controller 20A:

The controller adopts the three-stage charging mode, and

has perfect electronic protection function, which can

effectively extend the battery life, improve the system

performance, and ensure the system safety, stability and

long-term operation. TRIRION controller can be widely used

in RV, telecommunication base station, household system,

field monitoring, etc.

 

Product Features

• Advanced MPPT technology, with efficiency no less than 99.5%

• Monitor and set the parameters via mobile phone APP or PC software

• Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time

• Wide MPP operating voltage range

• High quality components, perfecting system performance, with maximum conversion efficiency of 98%

•Accurate recognition and tracking of multiple-peaks maximum power point

• International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life

• Charging power and current limitation function

• Compatible with lead-acid and lithium-ion batteries

Maximum Power Point Tracking Technology

Due to the nonlinear characteristics of solar array, there is a maximum energy output point (Max Power Point) on its curve. Traditional controllers, with switch charging technology and PWM charging technology, can’t charge the battery at the maximum power point, so can’t harvest the maximum energy available from PV array, but the solar charge controller with Maximum Power Point Tracking (MPPT) Technology can lock on the point to harvest the maximum energy and deliver it to the battery

The MPPT algorithm of our company continuously compares and adjusts the operating points to attempt to locate the maximum power point of the array. The tracking process is fully automatic and does not need user adjustment.

As the Figure 1-2, the curve is also the characteristic curve of the array, the MPPT technology will ‘boost’ the battery charge current through tracking the MPP. Assuming 100% conversion efficiency of the solar system, in that way, the following formula is established:

Product information

Item	Tracer1206AN Tracer1210AN	Tracer2206AN Tracer2210AN			Tracer3210AN		Tracer4210AN
Dimension	172x139 x 44mm	220x154x 52mm			228x164x55mm		252x180x63mm
Mounting dimension	130x130mm	170x145mm			170x164mm		210x171mm
Mounting hole size	Φ5mm
Terminal	12AWG(4mm2)		6AWG(16mm2)	6AWG(16mm2)		6AWG(16mm2)
Recommended cable	12AWG(4mm2)		10AWG(6mm2)	8AWG(10mm2)		6AWG(16mm2)
Weight	0.57kg		0.94kg	1.26kg		1.65kg