User's Manual

Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 150V /200V

Tracer-AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer-AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.

Features:

• High quality and low failure rate components of ST and IR ensure the product’s service life
• 100% charging and discharging in working environment temperature range
• Maximum DC/DC transfer efficiency as high as 98.7%
• Advanced MPPT technology & ultra-fast tracking speed guarantee tracking up to 99.5%
• Advanced MPPT control algorithm minimize the MPP loss rate and loss time
• Accurate recognition and tracking of multiple-peaks maximum power point
• Wide MPP operating voltage range
• Limit the charging power and current over rated value
• Support 4 charging options: Sealed, Gel, Flooded and User.
• Battery temperature compensation function
• Real-time energy statistics function
• Automatic over-temperature power reduction function
• Load relay control to realize diversified load work modes
• Auto-control of utility and generator relay design
• Remote temperature sensor and remote voltage sensor design, collect more accurate data of battery temperature and voltage value
• Isolated RS-485 with 5VDC/200Ma protected output for no power devices, with MODBUS protocol
• Monitor and set the parameters via mobile phone APP or PC software

Parameters

 

APK Download：Epever（WIFI&BLE）

Feature：

 

PS : this item only can be use for epever brand item,can't be use for others.

   VIDEO DEMO

 

Applicable Models Product series Communication Interface type LS-B series RS485 RJ45 VS-A series VS-BN series Tracer-A series Tracer-BN series SHI series STI series eTracer-AD series 3.81-4P eTracer-BND series iTracer-ND series

WiFi Adapter 

EPEVER WiFi 2.4G RJ45 D

Overview:

Through a local 2.4G WiFi network, the EPEVER WiFi 2.4G RJ45 D can transmit all operational data from the EPEVER solar controller, inverter, or inverter/charger to the EPEVER cloud server in real time. Users can remotely monitor the connected devices and program parameters via the EPEVER server platform and mobile APP.

Features:

Ÿ  Applicable to EPEVER controllers, inverters, or inverter/charger with RJ45 port

Ÿ Use immediately after connecting; easy and convenient operation

Ÿ Directly powered by the communication port

Ÿ Up to 20 meters of communication distance

Ÿ Support the Local monitoring and "EPEVER Cloud" working mode.

Specifications：

Model Parameter	EPEVER WiFi   2.4G RJ45 D
Working voltage	5V± 0.5V(Powered by RS485 com. port)
Power consumption	Peak emission: 150mA;    Idle: 310uA
Enclosure	IP30
Communication method	RS485
Communication parameters	115200Bps, 8N1
Interface standard	EPEVER communication standard V1-1.0
Work frequency	2.4 ~ 2.4835GHz
Work temperature range	-40℃~ 85℃
Dimension	63mm x 19mm x 10mm
Net weight	7.7g

EPEVER BLE RJ45 A : Bluetooth
Epever BLE RJ45 A is a new Bluetooth adapter suitable for EPEVER solar controller,inverter, and inverter/charger. Adopting the Bluetooth 5.0 transmission and BLE(Bluetooth Low Energy) technology, Eepver BLE RJ45 A enables data collection,communication, and wireless monitoring of connected devices.
Features: Support communication by APP Support data encryption Use immediately after connecting, easy and convenient operation Feature fast communication and strong anti interference ability D irectly powered by t h e communication port Up to 3 0 meters comm unication distance

Technical Specifications
Models	EPEVER BLE RJ45 A
Input Voltage	5V± 0.5V(Powered by RS485 com. port)
Power consumption	5V@30mA
Communication	≤10m
Serial port baud rate	2400 ~ 115200bps (default 115200bps）
Communication	RS485 to Bluetooth
Interface type	RJ45
Connecting cable	Standard network cable (parallel line)
Bluetooth protocol	Bluetooth 5.0, compatible with Bluetooth 4.0
Overall dimension	51*67*24.5mm
Mounting dimension	41.2
Mounting hole size	Φ3.2
Working temperature	-20~70℃
Enclosure	IP30
Net weight	38g

 

Item specifics

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read more	Model:	Waterproof Grid Tie Inverter
Power:	600W	Type:	Grid Tie Inverter
Charging Mode:	MPPT (Maximum Power Point Tracking)	MPN:	WG60010016
DC Input Voltage:	22V-50VDC	Brand:	SolarEpic
Waterproof Rating:	IP65	Application:	Home/Garden
Certificate:	CE	Resistance Properties:	Waterproof
Energy Type:	Solar	Country/Region of Manufacture:	China
Bundle Listing:	Yes	Current Type:	AC/DC
Featured Refinements:	Grid Tie Inverter	System Configuration:	Grid-Tie
Voltage:	24V

 

Note : This inverter do not have the monitoring function.

600W waterproof grid tie inverter,pure sine wave inverter.

DC20V-50V to AC110V or 220V,50Hz/60Hz auto.

Waterproof IP65.

System Function

◆ Wireless communication 433/462MHz

◆ 6-grade power search---In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic open 6-grade power search function,and keep outputing efficent and steady during the low power .

◆ Wide voltage input(22-50VDC)---

1. DC voltage input:22~50VDC; 2. Second level power variable voltage conversion.

◆ High-frequency two-way and one-way grid function---

1. High frequency direct modulation, AC half wave synthesis;
2. Two-way grid means: Load consume directly. And can reverse AC current transmission.

◆ Kinds of frequency output function---

1. It can apply to 50Hz and 60Hz frequency of AC; 2. Frequency range: 45Hz ~ 64Hz;

◆Directly connected to the solar panels (do not need to connect the battery)

◆ AC 0 angle with high precision auto-detection---

High-precision analysing the AC phase angle .The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.1. AC phase shift: < 1%; 2. Over-zero protection: 0.2 VAC; 3. AC switching: 50Hz / 60Hz.

◆ Synchronous High-frequency Modulation

1. Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz) ;
2. Synthetic way: MOSFET full-bridge; 3. High frequency: 50KHz.

◆ Pure Sine Wave Output---Use SPWM directly to make pure sine wave output.

1. Output waveform: Adopt complementary PWM to push-pull pure sine wave;
2. Generate means: enhancement-mode SPWM.

◆ Power Automatically Locked (APL)---

automatically powers locked in maximum power point, made output more stable.

◆ Constant Current, Constant Power---

constant current and output power, without any overload, over-current phenomenon.

◆ Exactly and timely automatic Island Effect Protection

◆ High-Frequency High Conversion Rate---

Adapt high frequency converter, the output more efficient.

◆ Maximum Power Point Tracking (MPPT)---

high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point,made the inverter discharge to power grid with the highest efficiency.

◆ Stack using--- Such as: 4 micro inverter of 260W stacking can achieve 1040W. the number of the stacking is unlimited.

◆ DC input---Input voltage range: 22V to 50V,PV Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels.Suggestion making the PV in parallel.

◆ AC output---220VAC: 180V - 262V, 50HZ; 110V AC: 80V - 160V,60HZ.

Notes:

★Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons.

★Non-professionals do not disassemble.Only qualified personnel may repair this product.

★Please install inverter in the low humidity and well ventilated place to avoid the inverter over-heating,and clear around the inflammable and explosive materials.

★When using this product, avoid children touching,playing, to avoid electric shock.

★Connected solar panels, battery or wind generators DC input DC power supply cable.

 

LED Display:

1.Red light 3 second---Red LED light 3 second while device starts , then in working condition;

2.Green flash fast---MPPT searching;

3.Green flash slow---MPPT + searching;

4. Red flash slow---MPPT - searching;

5.Green lights on 3s and off 0.5s---MPPT locked;

6.Red light steady---

1. Islanding protection;

b.Over-temperature protection;

c.Over / low AC voltage protection;

1. Over / low DC voltage protection; e.Fault

 

Remarks

LED flashing in the process of being working condition : inverters connected to AC & DC sides→Red LED light 3 second→Green LED flash fast(MPPT searching)→Green LED flash slow(MPPT + searching) / Red LED flash slow (MPPT - searching) / reen LED lights on 3s and off 0.5s (MPPT locked) .

 

 

What's In Box

1.One user manual;

2.One 600W inverter;

3.One AC Cable;

 

Item specifics

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read more	Model:	Waterproof Grid Tie Inverter
Features:	Waterproof	Type:	Grid Tie Inverter
Power:	300W	MPN:	WG300110227
Charging Mode:	MPPT (Maximum Power Point Tracking)	Brand:	SolarEpic
DC Input Voltage:	22-50VDC	Application:	Home/Garden
Waterproof Rating:	IP65	Resistance Properties:	Waterproof
Certificate:	CE	Country/Region of Manufacture:	China
Bundle Listing:	Yes	Current Type:	AC/DC
Featured Refinements:	Grid Tie Inverter	System Configuration:	Grid-Tie
RMS Power:	300W	Material:	Waterproof
Voltage:	24V/36V

 

Note : This inverter do not have the monitoring function.

300W waterproof grid tie inverter,pure sine wave inverter.

DC22V-50V to AC110V or 220V, 50Hz/60Hz auto.

Waterproof IP65.

Use for 24v/36v solar panel,do not suggest to use for battery or wind power.

System Function

◆ 6-grade power search---In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic open 6-grade power search function,and keep outputing efficent and steady during the low power .

◆ Wide voltage input(22-50VDC)---

1. DC voltage input:22~50VDC; 2. Second level power variable voltage conversion.

◆ High-frequency two-way and one-way grid function---

1. High frequency direct modulation, AC half wave synthesis;
2. Two-way grid means: Load consume directly. And can reverse AC current transmission.

◆ Kinds of frequency output function---

1. It can apply to 50Hz and 60Hz frequency of AC; 2. Frequency range: 45Hz ~ 64Hz;

◆Directly connected to the solar panels (do not need to connect the battery)

◆ AC 0 angle with high precision auto-detection---

High-precision analysing the AC phase angle .The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.1. AC phase shift: < 1%; 2. Over-zero protection: 0.2 VAC; 3. AC switching: 50Hz / 60Hz.

◆ Synchronous High-frequency Modulation

1. Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz) ;
2. Synthetic way: MOSFET full-bridge; 3. High frequency: 50KHz.

◆ Pure Sine Wave Output---Use SPWM directly to make pure sine wave output.

1. Output waveform: Adopt complementary PWM to push-pull pure sine wave;
2. Generate means: enhancement-mode SPWM.

◆ Power Automatically Locked (APL)---

automatically powers locked in maximum power point, made output more stable.

◆ Constant Current, Constant Power---

constant current and output power, without any overload, over-current phenomenon.

◆ Exactly and timely automatic Island Effect Protection

◆ High-Frequency High Conversion Rate---

Adapt high frequency converter, the output more efficient.

◆ Maximum Power Point Tracking (MPPT)---

high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point,made the inverter discharge to power grid with the highest efficiency.

◆ Stack using--- Such as: 4 micro inverter of 260W stacking can achieve 1040W. the number of the stacking is unlimited.

◆ DC input---Input voltage range: 22V to 50V,PV Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels.Suggestion making the PV in parallel.

◆ AC output---220VAC: 180V - 262V, 50HZ; 110V AC: 80V - 160V,60HZ.

Notes:

★Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons.

★Non-professionals do not disassemble.Only qualified personnel may repair this product.

★Please install inverter in the low humidity and well ventilated place to avoid the inverter over-heating,and clear around the inflammable and explosive materials.

★When using this product, avoid children touching,playing, to avoid electric shock.

★Connected solar panels, battery or wind generators DC input DC power supply cable.

 

LED Display:

1.Red light 3 second---Red LED light 3 second while device starts , then in working condition;

2.Green flash fast---MPPT searching;

3.Green flash slow---MPPT + searching;

4. Red flash slow---MPPT - searching;

5.Green lights on 3s and off 0.5s---MPPT locked;

6.Red light steady---

1. Islanding protection;

b.Over-temperature protection;

c.Over / low AC voltage protection;

1. Over / low DC voltage protection; e.Fault

 

Remarks 

LED flashing in the process of being working condition : inverters connected to AC & DC sides→Red LED light 3 second→Green LED flash fast(MPPT searching)→Green LED flash slow(MPPT + searching) / Red LED flash slow (MPPT - searching) / reen LED lights on 3s and off 0.5s (MPPT locked) .

 

Package

1.One user manual;

2.One 300W inverter;

3.One AC Cable;

SolarEpic MT50 LCD Remote Meter Suitable For Tracer-AN/Tracer-BN Charge Controller Epever 

Note : This kind of meter just can be use for epever controller,can't be use for 
renogy or hqst controller.

 Features:

 

 Electrical Parameters 

Faceplate dimensions	98×98 mm
Frame dimensions	114×114 mm
Connector type	RJ45
Meter cable	Standard 2m,Max 50 m
Meter weight	Simple package: 0.23 Kg Standard package:0.32 Kg
Ambient temperature	-20℃~+70℃

Description