All65 Products
Description
User's Manual
Lithium Battery MPPT Solar Charge Controller.
Epever 10A/15A/20A/30A-12V/24VDC Auto.
Max pv input voltage :60V(10A/15A/20A) or 100V(30A).
Waterproof class : IP65
The Tracer BP series solar charge controller adopt to the advanced Maximum Power Point Tracking charging methods, it enables the system charging and discharging management to obtain the most radical optimization. Increase the system flexibility,yet lower down the system cost. The controller support a variety of battery, for example sealed, gel, flooded and lithium battery. User can view and modify the working status and parameters. It can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.
Models：
10A : Tracer2606BP 130W/12V 260W/24VDC ,max pv 60V.
15A : Tracer3906BP 195W/12V 390W/24VDC ,max pv 60V.
20A : Tracer5206BP 260W/12V 520W/24VDC ,max pv 60V.
30A : Tracer7810BP 390W/12V 780W/24VDC ,max pv 100V.
Features：
- Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
- Wide working environment temperature(-40℃～60℃)
- Apply to lithium battery(LiFePO4/Li-NiCoMn)and battery(Sealed/Gel/Flooded)
- Lithium battery self-activating and low temperature protection function
- Maximum conversion efficiency of 98%
- Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99%
- Ultra-fast tracking speed and guaranteed tracking efficiency
- Accurately recognizing and tracking of multiple power points
- PV power limitation function
- Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485 communication interface.
- Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better
- Connecting the IOT(Internet of Things) module and Cloud Server monitoring software to realize remote monitoring of the multi-machine system
- The RS485 connector can provide power supply
- Aluminum housing for better cooling
- Real-time energy statistics function
- IP67 waterproof degree
- Long lifespan design，five years warranty
Load working mode:
- Manual Mode
- Light ON/OFF(Default)
- Light ON + Timer
- Real-time Control
- Intelligent Power Mode
Electronic protections:
- PV over current protection
- PV short circuit protection
- PV reverse polarity protection
- Battery reverse polarity protection
- Battery over voltage protection
- Battery over discharge protection
- Battery overheating protection
- Lithium battery low temperature protection
- Load overload protection
- Load Short circuit protection
Technical specifications
|
Model |
Tracer2606BP |
Tracer3906BP |
Tracer5206BP |
Tracer7810BP |
|
|
Tracer2610BP |
Tracer3910BP |
Tracer5210BP |
|||
|
Nominal system voltage |
12/24VDC auto |
||||
|
Rated charge/discharge current |
10A |
15A |
20A |
30A |
|
|
Rated charge power |
130W/12V 260W/24V |
195W/12V 390W/24V |
260W/12V 520W/24V |
390W/12V 780W/24V |
|
|
Max. PV open circuit voltage |
Tracer**06BP: 60V at minimum operating environment temperature 46V at 25℃ environment temperature Tracer**10BP:100V at minimum operating environment temperature 92V at 25℃ environment temperature |
||||
|
MPP voltage range |
Tracer**06BP: ( Battery voltage+2V)～36V Tracer**10BP: ( Battery voltage+2V)～72V |
||||
|
Battery type |
Sealed / Gel / Flooded ; LiFePO4 / Li-NiCoMn / User |
||||
|
Equalize charging voltage |
Sealed:14.6V(12V),29.2V(24V) /Gel: No / Flooded: 14.8V(12V),29.6V(24V); Li-battery: No |
||||
|
Boost charging voltage |
Sealed :14.4V(12V), 28.8V(24V)/ Gel:14.2V(12V), 28.4V(24V)/ Flooded:14.6V(12V), 29.2V(24V)/ LiFePO4:14.6V/ Li-NiCoMn:12.51V / User:9-34V |
||||
|
Float charging voltage |
Sealed/Gel/Flooded:13.8V(12V),27.6V(24V) LiFePO4:14.4V / Li-NiCoMn:12.39V / User:9-34V |
||||
|
Low voltage reconnect voltage |
Sealed/Gel/Flooded:12.6V(12V), 25.2V(24V) LiFePO4:12.0V / Li-NiCoMn:10.8V / User:9-34V |
||||
|
Low voltage disconnect voltage |
Sealed/Gel/Flooded:11.1V(12V),22.2V(24V) LiFePO4:10.6V / Li-NiCoMn:9.3V / User:9-34V |
||||
|
Self-consumption |
≤13mA/12V;≤11.5mA/24V |
||||
|
Communication |
RS485 |
||||
|
Overall dimension |
124×89×30mm |
150x93.5x32.7mm |
153.3x105x52.1mm |
||
|
Net weight |
0.54kg |
0.74kg |
1.2kg |
1.26kg |
|
|
Enclosure |
IP67 |
||||
|
Working environment temperature |
-40℃～+60℃ |
-40℃～+50℃ |
|||
※ Lithium battery do not automatic identification system voltage and no temperature compensation coefficient.
* Programmable voltage value by SPP-02 , RC-02 and APP.
VIDEO DEMO
User's Manual
Send from USA,2-8 working days delivery with tracking.Note : This kind of adapter just can be use for epever tracer an (50a-100a )controller.
PT-ADP-PORT——PT Adapter
PT Adapter is an accessory which can adjust the charging power of multiple controllers in parallel. This module ensures the charging current of each controller unit keep in close to the average of the total charging current, the adapter can monitor the charging status and adjusting the charging current of each controller in real time, can adjust charging running status according to charging full status of the battery, improving the service life of the equipment. At the same time, it can connect the PC software to monitor and set the operating parameters of each controller, which plays an important role in the parallel application of the controller.
Features：
1, Master and slave controller can be intelligently identified to realize equal-flow charging(one master controller in the system, and the rest are slave controllers)
2, Monitoring the online status of controller in real-time and switching the quantity of charging controller, improving the service life of the product.
3, Support up to 6 controllers in parallel
4, The communication port support the standard Modbus communication protocol, it can connect various modules or PC software to realize remote monitoring.
5, Easy one button press to set the communication baud rate.
6, LED indicator indicate the running status
|
Model |
PT-ADP-PORT |
|
Apply to model |
Tracer AN(50-100A) series solar controller PT series N+1 modular solar controller |
|
Input voltage |
5VDC(Power supply by the controller) |
|
Operation power consumption |
0.25W |
|
Serial port baud rate |
9600 115200(Default) |
|
Overall dimension |
151.5*69.9*38mm |
|
Mounting Dimension |
133.4mm |
|
Mounting hole size |
Φ6.5 |
|
Working temperature |
-35~75℃ |
|
Enclosure |
IP30 |
|
Weight |
39g |
VIDEO DEMO
Cable Connector Male+Female Wire Solar Panel Cable Connector
Send from USA,2-8 days delivery with tracking.
Specification:
Rate voltage :1000V
Rated current :30A(4mm2,6mm2)
Test voltage :6KV(50Hz)
Protect degree: IP67
Insulation material :PPO
Contact material Copper :sliver plated
Operating temperature :-40°C~+90°C
Safe class :2
Flame class: UL94-V0
Contact resistance of plug connectors: ≤5mΩ
Insertion force :≤50N
Withdraw force: ≥50N
Suitable cable :2.5mm2/4mm2/6mm2(AWG14/12/10)
Locking system Snap in
Drawing
Package include:
male solar panel cable connector
female solar panel cable connector
Solar Panel Cable Connector Male+Female Wire
Send from USA,2-8 days delivery with tracking.
Solar photovoltaic component cable connector, uses the inner drum shaped reed, the common mother joint and the component junction box connector is used together, PPO material, the joint has anti aging, ultraviolet resistance,can be use under the bad conditions for the power station.
Package include:
male solar panel cable connector
female solar panel cable connector
MC4 Solar Panel Connector T-3 branch Connector MC4 Connector
This MC4 Connector
This connector has the ability to tap the contact and high-grade anti-UV protection;
In line with the outdoor use under harsh conditions; maximum operating current of 30A; temperature -40 ~ 90; Safety class CIass II;
Waterproof rating IP65; maximum pressure DC1000V.
MC4 PHOTOVOLTAIC fuse connector -- SA7
Product features:
MC4 - parallel branch (compatible with MC4 connector) is an array of photovoltaic solar panels in parallel when module of the special connector, reliable connection rapidly, waterproof and dustproof, easy to use etc, shell has strong anti-aging, uv resistant ability, tight and clamping way is used to connect cable connection, male and female head fixed with stable self-locking mechanism, open and close freely.
Product parameters
● Maximum operating voltage: 1000V DC
● Maximum working current 30A
● Flame retardant grade: UL94-V0
● Pollution level: Level 2
● Connection resistance: ≤5mm ω
● Shell protection class: IP65
● Connecting wire specification: 1.5~6mm2
● Operating temperature: -40 ~ +85℃
● Safety level: Class ‖
● Insertion force: ≤50N
● Pull out force: ≥50N
● Fuse current: 20A
● Diameter of terminal: 4
Note :This is Solar Deck Panel Junction Connector,not the normal Solar Panel Connector.
Male+Female Wire Solar Panel Cable Connector
Send from China.
Specification:
Rated Voltage:1000 V DC
Rated Current : 30A
Contact Resistance:Less than 1 Mohms
Protections Class :II
Insulation Material:PPO+PA
Temperature Range: -40 ℃ ~ +85 ℃
Flame Class: UL94-VO
Waterproof Class : No waterproof.
Package include:
male solar panel cable connector
female solar panel cable connector
