All65 Products
User's Manual
Product Description
SolarEpic Tracer4215BN 40amp Solar Charge Controller Feature:
- Negative Grounding, 150V /138V PV Input
- Metal Case allows for natural heat dissipation
- Support 4 charging options: Sealed, Gel, Flooded and User
- 4 Stage Charging
- Serial connection (string) of PV modules allows minimize the charging current as a way of saving the energy
- Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
- Ultra-fast tracking speed and tracking efficiency
- Features Standard Modbus Interface with RS485 Port
MPPT Solar Charge Controller 40A Tracer4215BN Schematic Diagram
VIDEO DEMO
Latest product information（For more product video please click here）
![ESMART 4 Generation MPPT Solar Charge Controller 60A 200V PV Solar Panel Controller Negative Ground W [ESF48H60]](http://solarepic.com/cdn/shop/products/1_ace3056b-b917-464c-aca5-41b0e0958e8f_large.jpg?v=1680769845)
KEY FEATURES
Mppt Controller gathers energy from your solar panels, and stores it in your batteries, Using the
latest, fastest technology, it maximises this energy-harvest. Advanced Continuous Maximum
Power Point Tracking Increases PV Array Output. Gets more amp hours from your solar panels.
into your batteries everyday.
- High tacking efficiency of 99.5%
- Charges all battery types including over-discharged Lithium lon.
- Excellent performance at sunrise and low or variable solar insulation levels.
- Perfect protection against voltage overcharge damage caused by battery BMS disconnection.
- Builtin extensive electronic protection against surge, short-circuit, over-current, reverse polarity conditions,
- RS485 port to commuicate with others.(Blue-tooth,Wif,PC Remote Meter .etc)
AppIication scenarios
User's Manual
Product Description
EPEVER Tracer AN series mppt solar charge controller (100A)
Based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.
MSRT can give a very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system;
Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel.
The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.
VIDEO DEMO
Latest product information（For more product video please click here）
User's Manual
Product Description
Something you should know for Lithium Batteries Charging
- When a lithium-ion battery is used, the system voltage cannot be identified automatically, please confirm the battery system voltage before installation.
- When you choose lithium battery as a battery type, the temperature compensate coefficient would be 0, and cannot be changed.
- This MPPT solar charge controller can work under full load in the ambient temperature range. when the internal temperature reach 81℃, the power reduction mode will be turned on.
- Lithium battery type can ONLY be set on a cellphone app or "solar station monitor" PC software.
Schematic Diagram
Warm tips：
Step: Connect the system in the order of 1.battery-->2. load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.
- NEVER connect the soalr panel array to the controller Without/Before a Battery.
- Battery must be connected FIRST !!!
- DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
- If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
- The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance.
How to program for Lithium Battery？
1. Via PC (Accessories needed：RS485),
2. Via phone APP (Accessories needed：Ebox-Wifi or Ebox-Blue)
Software download website: EPever official website or look for in the manual
VIDEO DEMO
Latest product information（For more product video please click here）
Feature:
Compatible with PC software & MT50 for real-time monitoring
Connect to PC via USB interfaces with high compatibility
Powered up by controller communication interface
Record capacity: 20000 points(MAX)
LED Indicator design, more intuitive display
technical parameter
|
Model |
eLOG01 |
|
Input voltage |
4～10VDC Powered up by RS485 interface |
|
Average power consumption |
0.3W |
|
Baud rate |
115200 |
|
Communication |
RS485 |
|
Interface type |
2 RJ45 1 Micro USB |
|
Record time |
10 minutes |
|
Dimensions |
71×67.62×25.8mm |
|
Mounting dimension |
57.6mm |
|
Mounting hole size |
Φ4.5 |
|
Working temperature |
-25℃～75℃ |
|
Humidity |
5-95% (N.C.) |
|
Enclosure |
IP30 |
|
Net weight |
42g |
|
Warranty |
2 years |
APK Download：Epever（WIFI&BLE）
Feature：
- Realize wireless monitoring function of solar controller and inverter
- Support mobile phone APP, plug and play, simple and convenient to set
- Use high performance, ultra-low power consumption Bluetooth dedicated chip
- Adopt Bluetooth 4.0 and BLE technology
- Fast communication, strong anti-interference ability
- No need of external power supply
- Communication distance up to 10 m
- Master reset adapter
eBox-WIFI-01
- Realize wireless monitoring function of solar controller and inverter
- Support mobile phone APP, plug and play, simple and convenient to set
- Use high performance CPU with core M4
- Ultra-low power consumption and high speed data processing capability
- No need of external power supply
- Communication distance up to 50 m
- One-key restore the factory settings
Technical Specifications
|
Model→ Item↓ |
eBox-BLE-01 |
eBox-WIFI-01 |
|
Input Voltage |
5VDC (Direct powered by RS485 port ) |
5VDC (Direct powered by RS485 port ) |
|
Standby power Consumption |
0.04W |
0.20W |
|
Operation power consumption |
0.05W |
0.25W |
|
Communication distance |
≤10m |
≤50m |
|
Port baud rate |
300bps~230400bps (Default115200) |
300bps~230400bps (Default 115200) |
|
Communication |
RS485 to BLE |
RS485 to WIFI |
|
Interface type |
RJ45 |
RJ45 |
|
Connecting cable |
Standard network cable (Parallel cable) |
Standard network cable (Parallel cable) |
|
Overall dimension |
51*67*24.5mm |
51*67*24.5mm |
|
Mounting dimension |
41.2mm |
41.2mm |
|
Mounting hole size |
Φ3.2mm |
Φ3.2mm |
|
Working temperatur |
-20~70℃ |
-35~75℃ |
|
Enclosure |
IP30 |
IP30 |
|
Net weight |
37g |
39g |
SolarEpic MT50 LCD Remote Meter Suitable For Tracer-AN/Tracer-BN Charge Controller Epever
Note : This kind of meter just can be use for epever controller,can't be use for
renogy or hqst controller.
Features:
data of controllers;
■ Real-time display the operational data and working status of the connection devices in digital, graphic and textual forms by a large-screen multifunction LCD;
■ Direct, convenient and rapid operation of six navigation function keys;
■ Both data and power flowing on the same lead, no need for external power;
■ Real-time data monitoring and remote load switchover of the controllers, and data browse and modification of device parameters, charge control parameters and load control parameters;
■ Real-time display and acoustic alarm of failure information of the connection devices;
■ Longer communication distance based on RS485.
Electrical Parameters
|
Faceplate dimensions |
98×98 mm |
|
Frame dimensions |
114×114 mm |
|
Connector type |
RJ45 |
|
Meter cable |
Standard 2m,Max 50 m |
|
Meter weight |
Simple package: 0.23 Kg Standard package:0.32 Kg |
|
Ambient temperature |
-20℃~+70℃ |
Description
This adapter is used to monitor each controller on the network using
1. Remote Temperature Sensor
Model: RTS300R47K3.81A
Acquisition of battery temperature for undertaking
temperature compensation of control parameters
Length: 3 M
2. USB to RS485 Converter Adapter
Model: CC-USB-RS485-150U
