VIDEO DEMO

 Latest product information（For more product video please click here） 

User's Manual

Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 100V 

 Features：

• Advanced MPPT technology, with efficiency no less than 99.5%
• Ultra-fast tracking speed and guaranteed tracking efficiency
• Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
• Wide MPP operating voltage range
• High quality components, perfecting system performance, with maximum conversion efficiency of 98%
• Accurate recognition and tracking of multiple-peaks maximum power point 
• International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life
• Charging power and current limitation function
• Compatible with lead-acid and lithium-ion batteries
• Battery temperature compensation function
• Real-time energy statistics function
• Overheating power reduction function
• Multiple load work modes
• The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection. 
• With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
• Monitor and set the parameters via mobile phone APP or PC software 
• Full-load operation without any drop in capacity within the range of working environment temperature 
• Extensive electronic protection

Electrical Parameters&nbsp

①When a lead-acid battery is used, the controller hasn’t the low temperature protection.

②At minimum operating environment temperature

③At 25℃ environment temperature

④When a lithium-ion battery is used, the system voltage can’t be identified automatically.

Mechanical Parameters

User's Manual

Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 150V /200V

Tracer-AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer-AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.

Features:

• High quality and low failure rate components of ST and IR ensure the product’s service life
• 100% charging and discharging in working environment temperature range
• Maximum DC/DC transfer efficiency as high as 98.7%
• Advanced MPPT technology & ultra-fast tracking speed guarantee tracking up to 99.5%
• Advanced MPPT control algorithm minimize the MPP loss rate and loss time
• Accurate recognition and tracking of multiple-peaks maximum power point
• Wide MPP operating voltage range
• Limit the charging power and current over rated value
• Support 4 charging options: Sealed, Gel, Flooded and User.
• Battery temperature compensation function
• Real-time energy statistics function
• Automatic over-temperature power reduction function
• Load relay control to realize diversified load work modes
• Auto-control of utility and generator relay design
• Remote temperature sensor and remote voltage sensor design, collect more accurate data of battery temperature and voltage value
• Isolated RS-485 with 5VDC/200Ma protected output for no power devices, with MODBUS protocol
• Monitor and set the parameters via mobile phone APP or PC software

Parameters

User's Manual

Description

Based on common negative design and advanced MPPT control algorithm

MPPT Charge efficiency > 99%

Technical Data: Nominal system voltage:12/24VDC auto work

Rated charge current :20A

Rated discharge current: 20A

Battery input voltage range: 8-32V

Max. PV open circuit voltage:60V(at minimum operating environment temperature) 46V(at 25℃ environment temperature)

MPP voltage range:V(BAT)+2V～72V

Max. PV input power:260W(12V Battery) & 520W(24V battery)

Power terminals:#12 AWG(4mm2)

MT50 Remote Meter

This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

Technical Data Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

 

SolarEpic 2206AN Solar Charge Controller 20A:

The controller adopts the three-stage charging mode, and

has perfect electronic protection function, which can

effectively extend the battery life, improve the system

performance, and ensure the system safety, stability and

long-term operation. TRIRION controller can be widely used

in RV, telecommunication base station, household system,

field monitoring, etc.

 

Product Features

• Advanced MPPT technology, with efficiency no less than 99.5%

• Monitor and set the parameters via mobile phone APP or PC software

• Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time

• Wide MPP operating voltage range

• High quality components, perfecting system performance, with maximum conversion efficiency of 98%

•Accurate recognition and tracking of multiple-peaks maximum power point

• International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life

• Charging power and current limitation function

• Compatible with lead-acid and lithium-ion batteries

Maximum Power Point Tracking Technology

Due to the nonlinear characteristics of solar array, there is a maximum energy output point (Max Power Point) on its curve. Traditional controllers, with switch charging technology and PWM charging technology, can’t charge the battery at the maximum power point, so can’t harvest the maximum energy available from PV array, but the solar charge controller with Maximum Power Point Tracking (MPPT) Technology can lock on the point to harvest the maximum energy and deliver it to the battery

The MPPT algorithm of our company continuously compares and adjusts the operating points to attempt to locate the maximum power point of the array. The tracking process is fully automatic and does not need user adjustment.

As the Figure 1-2, the curve is also the characteristic curve of the array, the MPPT technology will ‘boost’ the battery charge current through tracking the MPP. Assuming 100% conversion efficiency of the solar system, in that way, the following formula is established:

Product information

Item	Tracer1206AN Tracer1210AN	Tracer2206AN Tracer2210AN			Tracer3210AN		Tracer4210AN
Dimension	172x139 x 44mm	220x154x 52mm			228x164x55mm		252x180x63mm
Mounting dimension	130x130mm	170x145mm			170x164mm		210x171mm
Mounting hole size	Φ5mm
Terminal	12AWG(4mm2)		6AWG(16mm2)	6AWG(16mm2)		6AWG(16mm2)
Recommended cable	12AWG(4mm2)		10AWG(6mm2)	8AWG(10mm2)		6AWG(16mm2)
Weight	0.57kg		0.94kg	1.26kg		1.65kg

User's Manual

Epever TRIRON Modular MPPT Solar Charge Controller Battery Charger Regulator Duo USB output Max input 60V/100V/150V

Features：

• Identify and load the drivers of various modules automatically
• Support the hot swapping function without any damage for each module
• Modular design for easy combination and replacement
• Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
• Advanced MPPT technology, with efficiency no less than 99.5%.
• High quality components, perfecting system performance, with maximum conversion efficiency of 98%.
• Ultra-fast tracking speed and guaranteed tracking efficiency.
• Automatic limitation of the charging power and current
• Wide MPP operating voltage range.
• Multiple load work modes
• Compatible with lead-acid and lithium-ion batteries
• Battery temperature compensation function.
• Real-time energy statistics function.
• Overheating power reduction function
• LCD and indicators to display operating data and status of the system
• User-friendly buttons for comfortable and convenient operation
• Master and slave RS485 communication modules design, reading the load or inverter operating data
• Control the inverter switch through the relay interface
• Provide 5VDC power through the dual USB output interface to charge electronic devices

Electrical Parameters 

SolarEpic MT50 LCD Remote Meter Suitable For Tracer-AN/Tracer-BN Charge Controller Epever 

Note : This kind of meter just can be use for epever controller,can't be use for 
renogy or hqst controller.

 Features:

 Electrical Parameters 

Description：

Description：