APK Download：Epever（WIFI&BLE）

Feature：

User's Manual

Send from USA,2-8 working days delivery with tracking.Note : This kind of adapter just can be use for epever tracer an (50a-100a )controller.

PT-ADP-PORT——PT Adapter

PT Adapter is an accessory which can adjust the charging power of multiple controllers in parallel. This module ensures the charging current of each controller unit keep in close to the average of the total charging current, the adapter can monitor the charging status and adjusting the charging current of each controller in real time, can adjust charging running status according to charging full status of the battery, improving the service life of the equipment. At the same time, it can connect the PC software to monitor and set the operating parameters of each controller, which plays an important role in the parallel application of the controller.

Features：

1, Master and slave controller can be intelligently identified to realize equal-flow charging(one master controller in the system, and the rest are slave controllers)

2, Monitoring the online status of controller in real-time and switching the quantity of charging controller, improving the service life of the product.

3, Support up to 6 controllers in parallel

4, The communication port support the standard Modbus communication protocol, it can connect various modules or PC software to realize remote monitoring.

5, Easy one button press to set the communication baud rate.

6, LED indicator indicate the running status

   VIDEO DEMO

The MT11 remote meter is an accessory which is compatible with the DuoRacer series controller. It can monitor the running data and working status of the controller via the remote meter. The remote meter can browse the controller’s parameters, set the battery typeand temperature unit, and clean the generated energy.It is suitable for RV, Camper, Boat, and so on.

Recommendations

• The MT11 is only allowed to connect with DR N series charge controller.Please confirm before purchase and installation.
• Pleasedo not install MT11 in a situation with strong electromagnetic 

Features：

• Automatically identify and display the type,model and relevant parameterdata of controllers.
• Real-timedisplay the operational data and working status of the connected devices indigital,graphics and textual forms by a large-screen multifunction LCD.
• Three touch buttons are easy and quick to operate.
• No need for external power supply. Charge controller supply the power for MT11.
• It can browse the controller’s parameters, set the battery typeand temperatureunit, and clean the generated energy.
• Real-time display of failure information of the connecteddevices.
• Longer communication distance based on RS485.

Technical Specifications        

Front View

LCD display screen

Man-machine interaction operation interface. 

Buttons

The meter buttons include two function buttons and one switch button.

 Rear View

• RS485communicationport

It is used to connect the controller which Power the MT11.

• Communicationcable’s models

CC-RS485-RS485-3.81-4P-150(Included)

CC-RS485-RS485-3.81-4P-1000(Optional)

CC-RS485-RS485-3.81-4P-2000(Optional)

• Pins definition

LCD display

	Night		BATT1 charging icon
	Display the parameters of PV		BATT2charging icon
	Display the parameters of BATT1		BATT1temperature parameters
	Display the parameters of BATT2		AES signal icon
	Setting icon		Battery type icon
	Auto global view sign		Minimum voltage icon
	Fault Icon		Maximum voltage icon

①Battery power capacity is calculated by the linear relationship between the disconnect voltage of low voltage and float charging voltage.

Description

User's Manual

Lithium Battery MPPT Solar Charge Controller.

Epever 10A/15A/20A/30A-12V/24VDC Auto.

Max pv input voltage :60V(10A/15A/20A) or 100V(30A).

Waterproof class  : IP65

The Tracer BP series solar charge controller adopt to the advanced Maximum Power Point Tracking charging methods, it enables the system charging and discharging management to obtain the most radical optimization. Increase the system flexibility,yet lower down the system cost. The controller support a variety of battery, for example sealed, gel, flooded and lithium battery. User can view and modify the working status and parameters. It can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

Models：

10A : Tracer2606BP 130W/12V 260W/24VDC ,max pv 60V.

15A : Tracer3906BP 195W/12V 390W/24VDC ,max pv 60V.

20A : Tracer5206BP 260W/12V 520W/24VDC ,max pv 60V.

30A : Tracer7810BP 390W/12V 780W/24VDC ,max pv 100V.

Features：

• Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
• Wide working environment temperature(-40℃～60℃)
• Apply to lithium battery(LiFePO4/Li-NiCoMn)and battery(Sealed/Gel/Flooded)
• Lithium battery self-activating and low temperature protection function
• Maximum conversion efficiency of 98%
• Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99%
• Ultra-fast tracking speed and guaranteed tracking efficiency
• Accurately recognizing and tracking of multiple power points
• PV power limitation function
• Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485 communication interface.
• Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better
• Connecting the IOT(Internet of Things) module and Cloud Server monitoring software to realize remote monitoring of the multi-machine system
• The RS485 connector can provide power supply
• Aluminum housing for better cooling
• Real-time energy statistics function
• IP67 waterproof degree
• Long lifespan design，five years warranty

Load working mode:

• Manual Mode
• Light ON/OFF(Default)
• Light ON + Timer
• Real-time Control
• Intelligent Power Mode

Electronic protections:

• PV over current protection
• PV short circuit protection
• PV reverse polarity protection
• Battery reverse polarity protection
• Battery over voltage protection
• Battery over discharge protection
• Battery overheating protection
• Lithium battery low temperature protection
• Load overload protection
• Load Short circuit protection

Technical specifications 

※ Lithium battery do not automatic identification system voltage and no temperature compensation coefficient.

* Programmable voltage value by SPP-02 , RC-02 and APP.

    VIDEO DEMO

KEY FEATURES

Mppt Controller gathers energy from your solar panels, and stores it in your batteries, Using the

latest, fastest technology, it maximises this energy-harvest. Advanced Continuous Maximum

Power Point Tracking Increases PV Array Output. Gets more amp hours from your solar panels.

into your batteries everyday.

• High tacking efficiency of 99.5%
• Charges all battery types including over-discharged Lithium lon.
• Excellent performance at sunrise and low or variable solar insulation levels.
• Perfect protection against voltage overcharge damage caused by battery BMS disconnection.
• Builtin extensive electronic protection against surge, short-circuit, over-current, reverse polarity conditions,
• RS485 port to commuicate with others.(Blue-tooth,Wif,PC Remote Meter .etc)

AppIication scenarios

Color : Sky Bule

600W/500W/400W/300W/200W

Grid tie inverter,pure sine wave inverter.

DC11V-32V to AC110V or 220V,50Hz/60Hz AUTO.

For 18V/36cells Solar Panel.

With MPPT Functions.

Smart Microinverter Introduction

Technical Parameters: