Feature Products

Feature Products13 Products

Category
  • Accessories&Tools (19)
  • Best selling (19)
  • Epever MPPT Controller (20)
  • Feature Products (13)
  • Gird tie inverter (17)
  • Inverter (29)
  • Inverter/Charger (8)
  • MC4 Connectors (7)
  • MC4 Connectors (2)
  • MPPT Solar Charger Controller (14)
  • Off tie inverter (2)
  • PWM Solar Charger Controller (1)
  • Tool (0)
  • US warehouse (0)
  • USA Warehouse (27)
  • Waterproof Grid tie inverter (6)
-23%
$168.99 $220.00

User's Manual 

 

 

Product Description

Prolong The Life Of Your Battery!

The smart battery protection system shields your device from getting over charged, over load, discharge, over heated, reverses polarity and also provides efficient short circuit protection. It can handle 520W Solar Panel on 12v battery system or 1040W Solar Panel on 24v battery system. Works equally great for home, industrial or commercial use. Designed for optimum and safe charging performance.

Technical Data

40A MPPT Charge Controller Nominal System Voltage: 12V, 24V

Rated Charge Current: 40A

Rated Load Current: 20A

Max PV Open Circuit Voltage: 150V / 138V

Max PV Input Power: 520W (12v battery) / 1040W (24v battery)

MT50 Remote Meter Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

Remote Temperature Sensor Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M

USB to RS485 Converter Adapter This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware.

Tracer 4215BN Series MPPT Solar Charge Controller 150V PV

MPPT Solar Charge Controller 40A Tracer4215BN Schematic Diagram

EPEVER MPPT Solar Charge Controller 40A 150V PV input Negative Ground Schematic Diagram

 

GO   VIDEO DEMO

 Latest product information(For more product video please click here 

 

    -16%
    $201.99 $240.00

    User's Manual


    Product Description

    MPPT Solar Charge Controller 100A EPEVER Tracer 10420AN

    Based on common negative design and advanced MPPT control algorithm

    MPPT Charge efficiency > 99%

    Technical Data: Nominal system voltage:12/24/36/48VDC auto work

    Rated charge current :100A

    Battery input voltage range: 8-68V

    Max. PV open circuit voltage:200V(at minimum operating environment temperature) 180V(at 25℃ environment temperature)

    MPP voltage range:V(BAT)+2V~144V

    Max. PV input power: 1250W/12V battery, 2500W/24V battery , 3750W/36V battery, 5000W/48V battery system

    Max Wire Size: #2 AWG(35mm2)

    Recommended Wire Size: #2 AWG(35mm2)

    Weight: 7.4kg

    MT50 Remote Meter

    This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

    Technical Data Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

    80A MPPT Solar Charge Controller Tracer8420AN

     

    EPEVER Tracer AN series mppt solar charge controller (100A)

    Based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.

    MSRT can give a very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system;

    Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel.

    The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.

     

     

    GO   VIDEO DEMO

     Latest product information(For more product video please click here 

     

     

      -7%
      $129.99 $140.00

      User's Manual


      Product Description

      40A EPEVER Tracer 4210AN MPPT Solar Charge Controller

      Based on common negative design and advanced MPPT control algorithm

      MPPT Charge efficiency > 99%

       

      Technical Data: Nominal system voltage:12/24VDC auto work

      Rated charge current :40A

      Rated discharge current: 40A

      Battery input voltage range: 8-32V

      Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)

      MPP voltage range:V(BAT)+2V~72V

      Max. PV input power:520W(12V Battery) & 1040W(24V battery)

      Power terminals:#6 AWG(16mm2)

       

      MT50 Remote Meter

      This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

      Technical Data Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

      Something you should know for Lithium Batteries Charging

       

      1. When a lithium-ion battery is used, the system voltage cannot be identified automatically, please confirm the battery system voltage before installation.
      2. When you choose lithium battery as a battery type, the temperature compensate coefficient would be 0, and cannot be changed.
      3. This MPPT solar charge controller can work under full load in the ambient temperature range. when the internal temperature reach 81℃, the power reduction mode will be turned on.
      4. Lithium battery type can ONLY be set on a cellphone app or "solar station monitor" PC software.

       

       

      Schematic Diagram

       


       


      Warm tips:

      Step: Connect the system in the order of 1.battery-->2. load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.

      • NEVER connect the soalr panel array to the controller Without/Before a Battery.
      • Battery must be connected FIRST !!!
      • DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
      • If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
      • The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance. 

       

      How to program for Lithium Battery?


      1. Via PC (Accessories needed:RS485),
      2. Via phone APP (Accessories needed:Ebox-Wifi or Ebox-Blue)
      Software download website: EPever official website or look for in the manual

       

      GO   VIDEO DEMO

       Latest product information(For more product video please click here 

       

        -33%
        $10.00 $15.00
        Description

        User's Manual

         

        Lithium Battery MPPT Solar Charge Controller.

        Epever 10A/15A/20A/30A-12V/24VDC Auto.

        Max pv input voltage :60V(10A/15A/20A) or 100V(30A).

        Waterproof class  : IP65


        The Tracer BP series solar charge controller adopt to the advanced Maximum Power Point Tracking charging methods, it enables the system charging and discharging management to obtain the most radical optimization. Increase the system flexibility,yet lower down the system cost. The controller support a variety of battery, for example sealed, gel, flooded and lithium battery. User can view and modify the working status and parameters. It can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

         

        Models

        10A : Tracer2606BP 130W/12V 260W/24VDC ,max pv 60V.

        15A : Tracer3906BP 195W/12V 390W/24VDC ,max pv 60V.

        20A : Tracer5206BP 260W/12V 520W/24VDC ,max pv 60V.

        30A : Tracer7810BP 390W/12V 780W/24VDC ,max pv 100V.

         

        Features

        • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
        • Wide working environment temperature(-40℃~60℃)
        • Apply to lithium battery(LiFePO4/Li-NiCoMn)and battery(Sealed/Gel/Flooded)
        • Lithium battery self-activating and low temperature protection function
        • Maximum conversion efficiency of 98%
        • Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99%
        • Ultra-fast tracking speed and guaranteed tracking efficiency
        • Accurately recognizing and tracking of multiple power points
        • PV power limitation function
        • Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485 communication interface.
        • Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better
        • Connecting the IOT(Internet of Things) module and Cloud Server monitoring software to realize remote monitoring of the multi-machine system
        • The RS485 connector can provide power supply
        • Aluminum housing for better cooling
        • Real-time energy statistics function
        • IP67 waterproof degree
        • Long lifespan design,five years warranty


        Load working mode:

        • Manual Mode
        • Light ON/OFF(Default)
        • Light ON + Timer
        • Real-time Control
        • Intelligent Power Mode

         

        Electronic protections:

        • PV over current protection
        • PV short circuit protection
        • PV reverse polarity protection
        • Battery reverse polarity protection
        • Battery over voltage protection
        • Battery over discharge protection
        • Battery overheating protection
        • Lithium battery low temperature protection
        • Load overload protection
        • Load Short circuit protection



        Technical specifications 

        Model

        Tracer2606BP

        Tracer3906BP

        Tracer5206BP

        Tracer7810BP

        Tracer2610BP

        Tracer3910BP

        Tracer5210BP

        Nominal system voltage

        12/24VDC auto

        Rated charge/discharge current

        10A

        15A

        20A

        30A

        Rated charge power

        130W/12V

        260W/24V

        195W/12V

        390W/24V

        260W/12V

        520W/24V

        390W/12V

        780W/24V

        Max. PV open circuit voltage

        Tracer**06BP: 60V at minimum operating environment temperature 46V at 25℃ environment temperature

        Tracer**10BP:100V at minimum operating environment temperature 92V at 25℃ environment temperature

        MPP voltage range

        Tracer**06BP: ( Battery voltage+2V)~36V

        Tracer**10BP: ( Battery voltage+2V)~72V

        Battery type

        Sealed / Gel / Flooded ; LiFePO4 / Li-NiCoMn / User

        Equalize charging voltage

        Sealed:14.6V(12V),29.2V(24V) /Gel: No / Flooded: 14.8V(12V),29.6V(24V); Li-battery: No

        Boost charging voltage

        Sealed :14.4V(12V), 28.8V(24V)/ Gel:14.2V(12V), 28.4V(24V)/

        Flooded:14.6V(12V), 29.2V(24V)/ LiFePO4:14.6V/

         Li-NiCoMn:12.51V / User:9-34V

        Float charging voltage

        Sealed/Gel/Flooded:13.8V(12V),27.6V(24V)

        LiFePO4:14.4V / Li-NiCoMn:12.39V / User:9-34V

        Low voltage reconnect voltage

        Sealed/Gel/Flooded:12.6V(12V), 25.2V(24V)

        LiFePO4:12.0V / Li-NiCoMn:10.8V / User:9-34V

        Low voltage disconnect voltage

        Sealed/Gel/Flooded:11.1V(12V),22.2V(24V)

        LiFePO4:10.6V / Li-NiCoMn:9.3V / User:9-34V

        Self-consumption

        ≤13mA/12V;≤11.5mA/24V

        Communication

        RS485

        Overall dimension

        124×89×30mm

        150x93.5x32.7mm

        153.3x105x52.1mm

        Net weight

        0.54kg

        0.74kg

        1.2kg

        1.26kg

        Enclosure

        IP67

        Working environment temperature

        -40℃~+60℃

        -40℃~+50℃

         

        ※ Lithium battery do not automatic identification system voltage and no temperature compensation coefficient.

        * Programmable voltage value by SPP-02 , RC-02 and APP.

         GO   VIDEO DEMO

         

          -14%
          $102.99 $120.00

          Send from USA,2-8 working days delivery with tracking.


          1300W grid tie inverter,DC18V or 24V to AC110V or 220V pure sine wave inverter.

          MPPT solar inverter,50/60hz auto,CE.

           

          Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system.

          The output need to be connected to the grid power. Can not supply power directly to the AC loads.

           


          Warranty

          1 Years Warranty

           

          What's In Box

          • 1 x 1300W Grid Tie Inverter
          • 1 x User's Manaul
          • 1 x AC Cord (US)
            -17%
            $189.99 $230.00

            User's Manual

            Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 150V /200V

            Tracer-AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer-AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.

            Features:

            • High quality and low failure rate components of ST and IR ensure the product’s service life
            • 100% charging and discharging in working environment temperature range
            • Maximum DC/DC transfer efficiency as high as 98.7%
            • Advanced MPPT technology & ultra-fast tracking speed guarantee tracking up to 99.5%
            • Advanced MPPT control algorithm minimize the MPP loss rate and loss time
            • Accurate recognition and tracking of multiple-peaks maximum power point
            • Wide MPP operating voltage range
            • Limit the charging power and current over rated value
            • Support 4 charging options: Sealed, Gel, Flooded and User.
            • Battery temperature compensation function
            • Real-time energy statistics function
            • Automatic over-temperature power reduction function
            • Load relay control to realize diversified load work modes
            • Auto-control of utility and generator relay design
            • Remote temperature sensor and remote voltage sensor design, collect more accurate data of battery temperature and voltage value
            • Isolated RS-485 with 5VDC/200Ma protected output for no power devices, with MODBUS protocol
            • Monitor and set the parameters via mobile phone APP or PC software
            Parameters

              -37%
              $94.99 $149.99

              User's Manual

               

              Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 100V 

                The Tracer AN series. Based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. Improving the MPPT control algorithm further, Tracer AN series can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions
                Also it can increase the ratio of energy utilization in the solar system by 10%-30% compared with a PWM charging method.
                The limitation function of the charging power and current and reducing charging power function automatic improve the stability which works even connecting oversize PV modules and in high temperature, and increase the professional protection chip for the communication port, further improving the reliability and meeting the different application requirements.

               Features:

              • Advanced MPPT technology, with efficiency no less than 99.5%
              • Ultra-fast tracking speed and guaranteed tracking efficiency
              • Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
              • Wide MPP operating voltage range
              • High quality components, perfecting system performance, with maximum conversion efficiency of 98%
              • Accurate recognition and tracking of multiple-peaks maximum power point 
              • International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life
              • Charging power and current limitation function
              • Compatible with lead-acid and lithium-ion batteries
              • Battery temperature compensation function
              • Real-time energy statistics function
              • Overheating power reduction function
              • Multiple load work modes
              • The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection. 
              • With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
              • Monitor and set the parameters via mobile phone APP or PC software 
              • Full-load operation without any drop in capacity within the range of working environment temperature 
              • Extensive electronic protection

               

              Electrical Parameters&nbsp

              Item

              Tracer

              1210AN

              Tracer

              2210AN

              Tracer

              3210AN

              Tracer

              4210AN

              System nominal voltage

                                                 12/24VDC Auto

              Rated charge current

              10A

              20A

              30A

              40A

              Rated discharge current

              10A

              20A

              30A

              40A

              Battery voltage range

                                                        8~32V

              Max. PV open circuit voltage

                          100V

                           92V

              MPP voltage range

              (Battery voltage +2V)~72V

              Max. PV input power

              130W/12V

              260W/24V

              260W/12V

              520W/24V

              390W/12V

              780W/24V

              520W/12V

              1040W/24V

              Self-consumption

              ≤12mA

              Discharge circuit voltage drop

               ≤0.23V

              Temperature compensate coefficient

              -3mV/℃/2V (Default)

              Grounding

              Common negative

              RS485 interface

              5VDC/100mA

              LCD backlight time

              60S (Default)

              ①When a lead-acid battery is used, the controller hasn’t the low temperature protection.

              ②At minimum operating environment temperature

              ③At 25℃ environment temperature

              ④When a lithium-ion battery is used, the system voltage can’t be identified automatically.

               

              Mechanical Parameters

              Item

              Tracer1210AN

              Tracer2210AN

              Tracer3210AN

              Tracer4210AN

              Dimension

              172x139 x 44mm

              220x154x 52mm

              228x164x55mm

              252x180x63mm

              Mounting dimension

              130x130mm

              170x145mm

              170x164mm

              210x171mm

              Mounting hole size

              Φ5mm

              Weight

              0.57kg

              0.94kg

              1.26kg

              1.65kg

                -18%
                $138.99 $169.99

                EPEVER MPPT Solar Charge Controller 40 Ampere Tracer 4215BN

                Prolong The Life Of Your Battery by using this 40A MPPT Charger

                The smart battery protection system shields your device from getting over charged, over load, discharge, over heated, reverses polarity and also provides efficient short circuit protection.

                It can handle 520W Solar Panel on 12v battery system or 1040W Solar Panel on 24v battery system. Works equally great for home, industrial or commercial use. Designed for optimum and safe charging performance.

                Technical Data

                40A MPPT Charge Controller Nominal System Voltage: 12V, 24V

                Rated Charge Current: 40A

                Rated Load Current: 20A

                Max PV Open Circuit Voltage: 150V / 138V

                Max PV Input Power: 520W (12v battery) / 1040W (24v battery)

                Recommended Power Input: 600W (12v battery) / 1200W (24v battery)

                Recommended value for LiFePO4 batteries (12.8V / 4 cells in series)

                Boost Duration 120 sec.

                Temp. Compensation Coefficient:0

                Over Volt. Disconnect (V): 15.6V

                Over Volt. Reconnect (V): 14.7V

                Equalize Charging Volt. (V): N/A

                Boost Charging Volt.(V): 14.5V

                Boost Reconnect Charge Volt.(V): 13.2V

                Charging Limit Voltage (V): 14.6V

                Discharging Limit Volt. (V):10.6V

                Low Voltage Disconnect Volt. (V): 11.1

                Low Voltage Reconnect Volt. (V): 12.8

                Under Vol. Warning Volt.(V):12.0

                Under Voltage Warning Reconnect Volt. (V): 12.8

                MPPT Solar Charge Controller SolarEpic EPEVER Tracer 4215BN 150V PV Negative Ground

                 

                 

                 

                 

                GO   VIDEO DEMO

                 Latest product information(For more product video please click here 

                  Search

                  Just added to your cart:
                  Qty:
                  Total:
                  Subtotal:
                  Excl. postage 
                  My Bag
                  Just added to your wishlist:
                  Excl. postage 
                  My Wishlist

                  Join Our Mailing List

                  Spin to win Spinner icon