Feature Products

Feature Products24 Products

Category
  • Accessories&Tools (19)
  • Battery (4)
  • Best selling (30)
  • Epever MPPT Controller (28)
  • Feature Products (24)
  • Gird tie inverter (17)
  • Inverter (29)
  • Inverter/Charger (8)
  • MC4 Connectors (7)
  • MC4 Connectors (2)
  • MPPT Solar Charger Controller (22)
  • Off tie inverter (2)
  • PWM Solar Charger Controller (1)
  • Solar panel (3)
  • Tool (0)
  • US warehouse (0)
  • USA Warehouse (38)
  • Waterproof Grid tie inverter (6)
-18%
$138.99 $169.99

EPEVER MPPT Solar Charge Controller 40 Ampere Tracer 4215BN

Prolong The Life Of Your Battery by using this 40A MPPT Charger

The smart battery protection system shields your device from getting over charged, over load, discharge, over heated, reverses polarity and also provides efficient short circuit protection.

It can handle 520W Solar Panel on 12v battery system or 1040W Solar Panel on 24v battery system. Works equally great for home, industrial or commercial use. Designed for optimum and safe charging performance.

Technical Data

40A MPPT Charge Controller Nominal System Voltage: 12V, 24V

Rated Charge Current: 40A

Rated Load Current: 20A

Max PV Open Circuit Voltage: 150V / 138V

Max PV Input Power: 520W (12v battery) / 1040W (24v battery)

Recommended Power Input: 600W (12v battery) / 1200W (24v battery)

Recommended value for LiFePO4 batteries (12.8V / 4 cells in series)

Boost Duration 120 sec.

Temp. Compensation Coefficient:0

Over Volt. Disconnect (V): 15.6V

Over Volt. Reconnect (V): 14.7V

Equalize Charging Volt. (V): N/A

Boost Charging Volt.(V): 14.5V

Boost Reconnect Charge Volt.(V): 13.2V

Charging Limit Voltage (V): 14.6V

Discharging Limit Volt. (V):10.6V

Low Voltage Disconnect Volt. (V): 11.1

Low Voltage Reconnect Volt. (V): 12.8

Under Vol. Warning Volt.(V):12.0

Under Voltage Warning Reconnect Volt. (V): 12.8

MPPT Solar Charge Controller SolarEpic EPEVER Tracer 4215BN 150V PV Negative Ground

 

 

 

 

GO   VIDEO DEMO

 Latest product information(For more product video please click here 

    -8%
    $32.99 $36.00

    SolarEpic MT50 LCD Remote Meter Suitable For Tracer-AN/Tracer-BN Charge Controller Epever 

    Note : This kind of meter just can be use for epever controller,can't be use for 
    renogy or hqst controller.

    The new-generation remote display unit MT50 for LSxxxxB(P), VSxxxxBN,TracerxxxxAN(P) and TracerxxxxBN(P) controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of solar controllers. 

     Features:

    ■ Automatic identify and display the type, model and relevant parameter
    data of controllers;
    ■ Real-time display the operational data and working status of the connection devices in digital, graphic and textual forms by a large-screen multifunction LCD;
    ■ Direct, convenient and rapid operation of six navigation function keys;
    ■ Both data and power flowing on the same lead, no need for external power;
    ■ Real-time data monitoring and remote load switchover of the controllers, and data browse and modification of device parameters, charge control parameters and load control parameters;
    ■ Real-time display and acoustic alarm of failure information of the connection devices;
    ■ Longer communication distance based on RS485.

     

     Electrical Parameters 

    Faceplate dimensions

    98×98 mm

    Frame dimensions

    114×114 mm

    Connector type

    RJ45

    Meter cable

    Standard 2m,Max 50 m

     

    Meter weight

    Simple package: 0.23 Kg

    Standard package:0.32 Kg

    Ambient temperature

    -20~+70

     
      Quick look
      Out of stock

       

      APK Download:Epever(WIFI&BLE)

      Feature:

           eBox-BLE-01
      • Realize wireless monitoring function of solar controller and inverter
      • Support mobile phone APP, plug and play, simple and convenient to set
      • Use high performance, ultra-low power consumption Bluetooth dedicated chip
      • Adopt Bluetooth 4.0 and BLE technology
      • Fast communication, strong anti-interference ability
      • No need of external power supply
      • Communication distance up to 10 m
      • Master reset adapter

      Bluetooth

          eBox-WIFI-01

      •  Realize wireless monitoring function of solar controller and inverter
      • Support mobile phone APP, plug and play, simple and convenient to set
      • Use high performance CPU with core M4
      • Ultra-low power consumption and high speed data processing capability
      • No need of external power supply
      • Communication distance up to 50 m
      • One-key restore the factory settings

      WIFI

       

      Technical Specifications

      Model→

      Item↓

      eBox-BLE-01

      eBox-WIFI-01

      Input Voltage

      5VDC

      (Direct powered by RS485 port )

      5VDC

      (Direct powered by RS485 port )

      Standby power

      Consumption

      0.04W

      0.20W

      Operation power

      consumption

      0.05W

      0.25W

      Communication distance

      ≤10m

      ≤50m

      Port baud rate

      300bps~230400bps (Default115200)

      300bps~230400bps (Default 115200)

      Communication

      RS485 to BLE

      RS485 to WIFI

      Interface type

      RJ45

      RJ45

      Connecting cable

      Standard network cable

      (Parallel cable)

      Standard network cable

      (Parallel cable)

      Overall dimension

      51*67*24.5mm

      51*67*24.5mm

      Mounting dimension

      41.2mm

      41.2mm

      Mounting hole size

      Φ3.2mm

      Φ3.2mm

      Working temperatur

      -20~70℃

      -35~75℃

      Enclosure

      IP30

      IP30

      Net weight

      37g

      39g

       

        -25%
        $15.00 $20.00
        Description

        This adapter is used to monitor each controller on the network using

        Solar Station PC software and update the firmware.
        this item include the two cables. 
        1. Remote Temperature Sensor 
        Model: RTS300R47K3.81A 
        Acquisition of battery temperature for undertaking 
        temperature compensation of control parameters 
        Length: 3 M 

        2. USB to RS485 Converter Adapter 
        Model: CC-USB-RS485-150U 

         

          Quick look
          -16%
          $41.96 $49.99
          The new type of clamp clamp is used to design the handle effectively with the principle of lever. Although the structure is small and compact, the operation,
          especially when the wire is pressed with large transverse section, is very efficient.
          Electrical connections that are not welded and conform to standard accuracy.
          The precision compression module and the overall locking (self release mechanical device) are designed to ensure that the quality of the press can be maintained in repeated compression.
          It has been carefully adjusted before the factory.
           Other info

          Model

          H03

          suitable object

          cable

          effect

           

          Break,tighten,strip,press

           

          character

          general

          texture

          chisel tool steel

          style

          German-style

            Quick look
            -12%
            $21.99 $25.00

            PS : this item only can be use for epever brand item,can't be use for others.

            GO   VIDEO DEMO

             

            Applicable Models

            Product series

            Communication

            Interface type

            LS-B series

            RS485

            RJ45

            VS-A series

            VS-BN series

            Tracer-A series

            Tracer-BN series

            SHI series

            STI series

            eTracer-AD series

            3.81-4P

            eTracer-BND series

            iTracer-ND series


            WiFi Adapter 

            EPEVER WiFi 2.4G RJ45 D

            Overview:

            Through a local 2.4G WiFi network, the EPEVER WiFi 2.4G RJ45 D can transmit all operational data from the EPEVER solar controller, inverter, or inverter/charger to the EPEVER cloud server in real time. Users can remotely monitor the connected devices and program parameters via the EPEVER server platform and mobile APP.



            Features:

            Ÿ  Applicable to EPEVER controllers, inverters, or inverter/charger with RJ45 port

            Ÿ Use immediately after connecting; easy and convenient operation

            Ÿ Directly powered by the communication port

            Ÿ Up to 20 meters of communication distance

            Ÿ Support the Local monitoring and "EPEVER Cloud" working mode.



            Specifications:

            Model

            Parameter

            EPEVER WiFi   2.4G RJ45 D

            Working voltage

            5V± 0.5V(Powered by RS485 com. port)

            Power consumption

            Peak emission: 150mA;    Idle: 310uA

            Enclosure

            IP30

            Communication method

            RS485

            Communication parameters

            115200Bps, 8N1

            Interface standard

            EPEVER communication standard V1-1.0

            Work frequency

            2.4 ~ 2.4835GHz

            Work temperature range

            -40℃~ 85℃

            Dimension

            63mm x 19mm x 10mm

            Net weight

            7.7g


            EPEVER BLE RJ45 A : Bluetooth
            Epever BLE RJ45 A is a new Bluetooth adapter suitable for EPEVER solar controller,inverter, and inverter/charger. Adopting the Bluetooth 5.0 transmission and BLE(Bluetooth Low Energy) technology, Eepver BLE RJ45 A enables data collection,communication, and wireless monitoring of connected devices.
            Features: Support communication by APP Support data encryption Use immediately after connecting, easy and convenient operation Feature fast communication and strong anti interference ability D irectly powered by t h e communication port Up to 3 0 meters comm unication distance

            Technical Specifications

            Models

            EPEVER BLE RJ45 A

            Input Voltage

            5V± 0.5V(Powered by RS485 com. port)

            Power consumption

            5V@30mA

            Communication

            ≤10m

            Serial port baud rate

            2400 ~ 115200bps (default 115200bps

            Communication

            RS485 to Bluetooth

            Interface type

            RJ45

            Connecting cable

            Standard network cable (parallel line)

            Bluetooth protocol

            Bluetooth 5.0, compatible with Bluetooth 4.0

            Overall dimension

            51*67*24.5mm

            Mounting dimension

            41.2

            Mounting hole size

            Φ3.2

            Working temperature

            -20~70℃

            Enclosure

            IP30

            Net weight

            38g

              Quick look
              -7%
              $166.00 $179.00

               

                Quick look
                -3%
                $268.00 $275.00

                 

                  Quick look

                  Search

                  Just added to your cart:
                  Qty:
                  Total:
                  Subtotal:
                  Excl. postage 
                  My Bag
                  Just added to your wishlist:
                  Excl. postage 
                  My Wishlist

                  Join Our Mailing List

                  Spin to win Spinner icon