SHI series is a pure sine wave inverter which can convert 12/24/48Vdc to 220/230Vac 50/60Hz based on full digital and intelligent design.It features high reliability,high efficiency,concise outline,small volume,easy installation and operation.The inverter can be applied in many fields,such as household appliances,electric tools and industrial devices etc,especially for solar photovoltaic power system.

Feature：

• Input & output fully isolation
• Adoption of advanced SPWM technology, pure sine wave output
• Dynamic current loop control technology
• Wide DC input voltage range
• Excellent EMC design
• Low output harmonic distortion（THD≤3%）
• LED indicators for input voltage range, load power range, normal output & failure state
• Optional energy saving mode
• Extensive electronic protection

Technical specifications:

Types	SHI400-12	SHI400-22	SHI600-12	SHI600-22	SHI1000-22	SHI1000-42	SHI2000-22	SHI2000-42	SHI3000-22	SH 13000-42
Nominal Battery Voltage	12V	24V	12V	24V	24V	48V	24V	48V	24V	48V
Input Voltage Range	10.8~16Vdc	21.6~32Vdc	10.8~16Vdc	21.6~32Vdc	21.6~32Vdc	43.2~64Vdc	21.6~32Vdc	43.2~64Vdc	21.6~32Vdc	43.2 ~64Vdc
No Load Current	<0.8A	<0.45A	<0.7A	<0.45A	<0.45A	<0.35A	<0.7A	<0.7A	<1.2A	<1.0A
Output Wave	Pure Sine Wave
Output Voltage	220Vac±3% /230Vac±10%
Continuous Power	400W		600W		1000W		2000W		3000W
Power 10 sec	600W		900W		1500W		3000W		4500W
Power 1.5 sec	800W		1200W		2000W		4000W		6000W
Surge Power	900W		1350W		2250W		4600W		6900W
Frequency	50/60Hz±0.2%
Distortion THD	< 3% (resistive load)
Efficiency at Rated Power	>91%	>92%	>91%	>92%	>93%	>93.5%	>93%	>94%	>93%	>94%
Max. Efficiency	>92%	>93%	>93%	>94%	>94%	>94%	>95%	>95%	>95%	>95%
Terminal	16mm2		25mm2		25mm2		50mm2		50mm2
Dimensi ons	280Xl66X74.3mm		295 X186 X 82mm		295X208X98mm		436X249Xl16mm		507X249 % 116mm
Installatio n	150 X 158mm		150x178mm		150X200mm		236X220mm		236 X 270mm
Hole Size	<P5mm		<P6mm		①6mm		①6mm		<P6mm
Net Weight	1.8kg		2.3kg		3.3kg		6.0kg		7.5kg
Working Temperature	-20℃~ +50℃
Storage Temperature	-35℃~ +70℃
Humidity	<95%(N.C.)
Altitude	< 5000m(Derating to operate according to IEC62040 at a height exceeding 1000m)

Description

 

Feature:

Compatible with PC software & MT50 for real-time monitoring
Connect to PC via USB interfaces with high compatibility
Powered up by controller communication interface
Record capacity: 20000 points(MAX)
LED Indicator design, more intuitive display

technical parameter

Model	eLOG01
Input voltage	4～10VDC Powered up by RS485 interface
Average power consumption	0.3W
Baud rate	115200
Communication	RS485
Interface type	2 RJ45 1 Micro USB
Record time	10 minutes
Dimensions	71×67.62×25.8mm
Mounting dimension	57.6mm
Mounting hole size	Φ4.5
Working temperature	-25℃～75℃
Humidity	5-95% (N.C.)
Enclosure	IP30
Net weight	42g
Warranty	2 years

 

IPower series is a pure sine wave inverter which can convert 12/24/48Vdc into 110V/220Vac. It has the characteristics of concise outline, compact size, high reliability, high efficiency, easy to install and operate and so on. The inverter applicable to household emergency lighting system, vehicle mounted system and small field power supply, etc.

Feature:

• Safe design with input and output electrical isolation
• Adoption of advanced SPWM technology, pure sine wave output
• Optional output voltage220/230VAC (or 110/120VAC ), setted by DIP switch
• Output frequency 50/60Hz, setted by DIP switch
• LED indicators for working and fault status
• Lower No-load consumption
• Max. efficiency up to 95%
• Input protection: Over voltage protection, low voltage protection
• Output protection: Over load protection, short circuit protection
• Over temperature protection: Temperature-controlled Fan Ventilation; Inverter turns off automatically
• Industrial grade design

Technical specifications（350W/500W）:

Model	350-11	500-11	350-21	500-21	350-12	500-12	350-22	500-22
Item
Input Rated Voltage	12VDC		24VDC		12VDC		24VDC
Input Voltage Range	10.8～16VDC		21.6～32VDC		10.8～16VDC		21.6～32VDC
Input surge voltage	<32V		<44V		<32V		<44V
Fuse	32VDC/50A	2*32VDC/35A	32VDC/30A	2*32VDC/25A	32VDC/50A	2*32VDC/35A	32VDC/30A	2*32VDC/25A
No-load current	<0.7A	<0.9A	<0.5A	<0.5A	<0.7A	<0.9A	<0.5A	<0.5A
Output Voltage	110VAC(±5%)				220VAC(±5%)
	120VAC(-10%～+5%)				230VAC(-10%～+5%)
Output Continuous Power(-20℃～+45℃)	350VA	500VA	350VA	500VA	350VA	500VA	350VA	500VA
Power factor	0.8				0.8
Instantaneous impact power	≥750VA	≥1000VA	≥750VA	≥1000VA	≥750VA	≥1000VA	≥750VA	≥1000VA
Output way	Single phase				Single phase
Output Wave	Pure sine wave				Pure sine wave
Output Frequency	50/60Hz（±0.2%）				50/60Hz（±0.2%）
Distortion THD	THD≤5%(Resistive load)				THD≤5%(Resistive load)
Max. Efficiency	91%				92%
	90%(IP350-11)				91%(IP350-12)
Max. USB Output	5VDC/1A				5VDC/1A

 

Model	350-11 350-12	350-21 350-22	500-11 500-12	500-21 500-22
DC input terminal	6mm2
Overall dimension	214×105.5×57.7mm		232.2×132×74.5mm
Mounting dimension	185.5×76.7mm		205×102mm
Mounting hole size	Φ4.2mm		Φ5.2mm
Net weight	0.9kg		1.4kg

Working environment temperature	-20℃～+45℃
Storage temperature range	-35℃～+70℃
Humidity range	≤93%（N.C.）
Enclosure	IP20
Altitude	<2000m
	(Derating to operate according to IEC62040 at a height exceeding 1000 m)

Technical specifications(1500W/2000W):

Model	1500-11	1500-21	2000-21	2000-41	1500-12	1500-22	2000-22	2000-42
Item
Input Rated Voltage	12VDC	24VDC	24VDC	48VDC	12VDC	24VDC	24VDC	48VDC
Input Voltage Range	10.8～16VDC	21.6～32VDC	21.6～32VDC	43.2～60VDC	10.8～16VDC	21.6～32VDC	21.6～32VDC	43.2～60VDC
Input surge voltage	＜20VDC	＜40VDC	＜40VDC	＜80VDC	＜20VDC	＜40VDC	＜40VDC	＜80VDC
No-load current	＜1.0A	＜0.6A	＜0.6A	＜0.4A	＜1.0A	＜0.6A	＜0.6A	＜0.4A
Output Voltage	110VAC(±5%)		110VAC(±5%)		220VAC(±5%)		220VAC(±5%)
	120VAC(-7%～+5%)		120VAC(-10%～+5%)		230VAC(-7%～+5%)		230VAC(-10%～+5%)
Output Continuous Power	1200W		1600W		1200W		1600W
Output Power 15 min.	1500W		2000W		1500W		2000W
Instantaneous impact power	2400W		3200W		2400W		3200W
Output way	Single phase		Single phase		Single phase		Single phase
Output Wave	Pure sine wave		Pure sine wave		Pure sine wave		Pure sine wave
Output Frequency	50/60Hz（±0.2%）		50/60Hz(±0.2%)		50/60Hz（±0.2%）		50/60Hz(±0.2%)
Distortion THD	THD≤5%(Resistive load)		THD≤5%(Resistive load)		THD≤5%(Resistive load)		THD≤5%(Resistive load)
Max. Efficiency	93%	94%	95%		93%	94%	95%
Max. USB Output	5VDC/1A		5VDC/1A		5VDC/1A		5VDC/1A
Binding post	Φ10mm		Φ10mm		Φ10mm		Φ10mm

 

Model	1500-11 1500-12	1500-21 1500-22	2000-21 2000-22	2000-41 2000-42
Item
Overall dimension	326.12×231.5×98.5mm	284.7×231.5×98.5mm	326.12×231.5×98.5mm
Mounting dimension	208×220mm	163×220mm	208×219.5mm
Mounting hole size	Φ5.5mm		Φ5.5mm
Net weight	3.9kg		4.0kg

 

Working Temperature	-20℃~+45℃
Storage Temperature	-35℃~ +70℃
Humidity	< 95%(N.C.)
Enclosure	IP20
Altitude	< 5000 m (Derating to operate according to IEC62040 at a height exceeding 1000 m)

Note : just can be use for ANDROID phone,

CAN'T be use for iPHONE.

APK Download：Epever（WIFI&BLE）

Feature：

Feature

• Ultra-saving pliers. Cold press pliers. Terminal pliers series
• The new crimping pliers adopts the principle of lever to effectively design the handle.
• Although the structure is small and compact, it is very labor-saving when operating, especially when crimping the wires with large transverse joint sections.
• For non-welded, electrical connections that meet the accuracy criteria
• Precision crimping module and integral locking (custom release mechanism) design ensures high quality crimp line standards during repeated crimping
• Precise and accurate adjustment before leaving the factory.

 

 

Model	H03
suitable object	cable
effect	Break,tighten,strip,press
character	general
texture	chisel tool steel
style	German-style

DuoRacer Series ——MPPT Dual Battery Solar Charge Controller

DuoRacer MPPT charge controller is made for charging two batteries (shown as BATT1 and BATT2 below) at the same time in a solar system. This controller supports multiple life battery (BATT1) types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn, which is suitable for RV, Camper, Boat, and so on. The device recognizes the start battery (BATT2) system voltage automatically, and trickle charges the battery when the conditions are satisfied.

The controller adopts the advanced MPPT control algorithm,which will minimize the maximum power point loss rate and loss time,also fast track the maximum power point(MPP) of the PV array, and obtain the maximum energy from solar array under any conditions. The energy utilization in the MPPT solar system is increased by 20-30% compared with PWM charging method. When there is no manual operation for a long time, and the charging conditions cannot be reached, the controller will turn to low-power mode, which reduces the loss and battery power waste to enhance the products life. The system parameters are shown and set by LED/LCD or the MT11 remote meter (Accessory).

The AES control signal of the car refrigerator is built in the controller, which will supply the surplus solar power to the refrigerator to avoid energy waste. The controller comes with IP33 protection level, which is waterproof and dustproof. Multiple protection features, including battery overcharge protection, over discharge protection, and reverse connection protection of the PV and battery, which effectively ensure the solar system safety, stability, and lifetime.

 

 

Features：

· Maximum Power Point Tracking technology with ultra-fast tracking speed and the tracking efficiency is no less than 99.5% guaranteed
· Advanced MPPT control algorithm to minimize the MPPlost rate and lost time
· The wider range of the MPP operation voltage to improve the PV module
   utilization
· Auto control function of charging power & charging current limitation(BATT1)
· High quality and low failure rate components of ST, TI and Infineon to ensure      the product life
· Digital circuit control of adaptive three-stage charging mode to enhance BATT1
   life.
· BATT1 type can be set via LED/LCD.
· Product runs into the low-power mode when there is no manual operation for a
  long time, and charging conditions are not satisfied (PV<5V).
· 100% charging and discharging in operationenvironmental temperature range.
· LED and LCD dispiay units selectable.
· AES control signal for car refrigerator to avoid energy waste.
· Standard Modbus protocol, and RS485 (5V/200mA) communication port for         the customer to expand the application area.

 

 

Technical specifications

Item	DR1206N-DDB      DR1206N-DDS	DR2210N-DDB DR2210N-DDS	DR3210N-DDB DR3210N-DDS
BATT1 rated voltage	12/24VDC
Rated Charge Current	10A	20A	30A
Battery Input Voltage Range	8.5～32V
Max. PV Open Circuit Voltage	60V(At min. operating environment temp.) 46V(At 25℃ environment temp.)	100V(At min. operating environment temp.) 92V(At 25℃ environment temp.)
MPP Voltage Range	(Battery Voltage+2V)～36V	(Battery Voltage+2V)～72V
Rated Charge Power	130W/12V 260W/24V	260W/12V 520W/24V	390W/12V 780W/24V
Max. conversion efficiency	97.40%	97.50%	98%
Full load efficiency	97%	96%	96%
Self-consumption	12mA/12V;8mA/24V 4mA/12V;3mA/24V(Low-power mode)	26mA/12V;15mA/24V 19mA/12V;10mA/24V(Low-power mode)
Temperature compensate coefficient①	－3mV/℃/2V(default)
Grounding	Common negative
Common negative	13.8V/12V;27.6V/24V(default)
BATT2 Charge return voltage	13V/12V;26V/24V(defaul
AES signal port ②	5VDC/Max.200mA(3.81-4P)
RS485 com. port ②
Com. baud rate③	115200(default)
LCD backlight time④	60S(default)

 Mechanical Parameters

 

Item	DR1206N-DDB DR1206N-DDS	DR2210N-DDB DR2210N-DDS	DR3210N-DDB DR3210N-DDS
Dimension	227.2×143×58.1mm	243.7×158×63mm	247.2×165×68.5mm
Mounting dimension	160×134mm	180×149mm	180×156mm
Mounting hole size	φ5mm
Terminal	12AWG/4mm2 (BATT1) 12AWG/4mm²(BATT2)	6AWG/16mm2 (BATT1) 12AWG/4mm²(BATT2)
Recommended cable size	12AWG/4mm²(BATT1) 12AWG/4mm²(BATT2)	10AWG/6mm²(BATT1) 12AWG/4mm²(BATT2)	8AWG/6mm²(BATT1) 12AWG/4mm²(BATT2)
Weight	0.8kg	1.1kg	1.4kg

 

 Environmental Parameters

 

Item	DR1206/2210N-DDB DR1206/2210N-DDS	DR3210N-DDB   DR3210N-DDS
Working environment temperature(100% input and output)	﹣20℃～+50℃(DDS) ﹣30℃～+50℃(DDB	﹣20℃～+45℃(DDS) ﹣30℃～+45℃(DDB)
Storage temperature range	-30℃～+80℃
Relative humidity	≤95%, N.C
Enclosure	IP33 3-protection against solid objects: protected against solids objects over 2.5mm. 3-protected against sprays to 60°from the vertical.
Pollution degree	PD2

 

①The Temperature compensate coefficient is zero and not changeable when the life battery type is lithium battery。

②If the AES signal port and RS485 communication port are used in the same time, the toal current is no greater than 200mA.

③The communication baud rate can only be set via PC software.

④The LCD backing time can only be set via PC software, setting range is 0~999S and the 0s means the LCD is on all the time. DDB:DuoRacer Display Basic (LED) DDS:DuoRacer Display Standard (LCD)

 

 VIDEO DEMO

For more product video please click here

The MT series remote meter is an accessory which is compatible with the DuoRacer series controller. It can monitor the running data and working status of the controller via the remote meter. The remote meter can browse the controller’s parameters, set the battery typeand temperature unit, and clean the generated energy.It is suitable for RV, Camper, Boat, and so on.

Recommendations

• The MT11 is only allowed to connect with DR N series charge controller.Please confirm before purchase and installation.
• Pleasedo not install MT11 in a situation with strong electromagnetic 

Features：

• Automatically identify and display the type,model and relevant parameterdata of controllers.
• Real-timedisplay the operational data and working status of the connected devices indigital,graphics and textual forms by a large-screen multifunction LCD.
• Three touch buttons are easy and quick to operate.
• No need for external power supply. Charge controller supply the power for MT11.
• It can browse the controller’s parameters, set the battery typeand temperatureunit, and clean the generated energy.
• Real-time display of failure information of the connecteddevices.
• Longer communication distance based on RS485.

Technical Specifications        

Model	MT11
Apply to model	DRN series
Self-consumption(Power on)	13mA/5Vdc
Self-consumption(Power off)	4mA
Communication way	RS485
Communication port	3.81-4P
RS485 cable	CC-RS485-RS485-3.81-4P-150(1.5m) CC-RS485-RS485-3.81-4P-500(5m) CC-RS485-RS485-3.81-4P-1000(10m)
Environment temperature	-20℃～+70℃
Storage temperature range	-20℃～+70℃
Enclosure	IP20
Dimension	98.4×98.4mm
Base cover dimension	114×114mm
Weight	0.11kg

Front View

 

LCD display screen

Man-machine interaction operation interface. 

Buttons

The meter buttons include two function buttons and one switch button.

	Press the button	1.PV array parameters 2.Storage battery parameters 3.Browse the start battery parameters automatically ()
	Press the button	Browse the PV array parameters Browse the Storage battery parameters Browse the start battery parameters
	Press the button and hold on 5s	Temperature unitsBattery type
	Press the button	The meter is powered ON
	Press the button and hold on 5s	The meter is powered OFF

 

 Rear View

 

 

• RS485communicationport

It is used to connect the controller which Power the MT11.

• Communicationcable’s models

CC-RS485-RS485-3.81-4P-150(Included)

CC-RS485-RS485-3.81-4P-1000(Optional)

CC-RS485-RS485-3.81-4P-2000(Optional)

 

• Pins definition

PIN	Definition
1	DC5V
2	RS-485-B
3	RS-485-A
4	GND

LCD display

 

Icon	Instruction	Icon	Instruction
	BATT1 battery capacity level①0～12%		BATT2battery capacity level①0～12%
	BATT1battery capacity level①13%～35%		BATT2battery capacity level①13%～35%
	BATT1battery容量水平① 36％〜61％		BATT2battery capacity level①36%～61%
	BATT1battery capacity level①62%～86%		BATT2battery capacity level①62%～86%
	BATT1battery capacity level① 87%～100%		BATT2battery capacity level① 87%～100%
	Day		PV array

	Night		BATT1 charging icon
	Display the parameters of PV		BATT2charging icon
	Display the parameters of BATT1		BATT1temperature parameters
	Display the parameters of BATT2		AES signal icon
	Setting icon		Battery type icon
	Auto global view sign		Minimum voltage icon
	Fault Icon		Maximum voltage icon

①Battery power capacity is calculated by the linear relationship between the disconnect voltage of low voltage and float charging voltage.